Doh!

Was hitting a very hot build hard, got a dryish hit, even a bit of cotton smolder. So I quickly whipped off the top cap and started painting some juice. I touched the tip of my juice bottle onto the hot coil and melted a bit onto it. Worse, I didn't realize till I took a big ol' hit...not the tastiest vape I've ever had.

Kanthal is cheap, experience is priceless.


 


Similar Content



Attention Lemo 2 Users...

Just a little warning to all who have purchased the Lemo 2- Do not use the wire included in the box.
I was a little worried when i was using the stock coil and noticed it had been turning a green color after a few days of use, not sure if this is the case with all Lemo 2's, but if you notice your wire is turning greenish, just throw it out and replace it. I don't believe this is kanthal, it could possibly be nichrome, but it's properties are not matching up with those of kanthal. My worries were confirmed when I decided to put a parallel 5 wrap coil on my rda with that wire because of my lack of other 24 gauge... Well today when I took out my cotton and dry burned the coil a little to rid it of excess juice, the coil actually deformed and somewhat melted on my rda . I don't know what kind of metal this is, but I'm positive it is not kanthal, this has never happened to me with kanthal, and this wire seems to be of a lower resistance than kanthal. Anyway, just wanted to let ya'll know to be careful with that wire, or just throw it out altogether. Otherwise, the Lemo 2 is a fantastic tank  

Rusting 24g Kanthal?

Hey guys,
I recently started playing around with 24g kanthal in a kayfun lite plus clone that I had bought last year and started to notice a serious issue which was that juice would at some point start to look orangish, when I recently opened it up to change the coil to put in a new flavor it was completely black. However when I had previously fired it and had noticed no burnt taste. Any ideas as to what's going on.
Background on build
24g purchased from brick and mortar store
Cosmic Orange BLawesome juice (pinkish)
0.6ohm coil 6 wraps
eleaf istick at 32.2 watts

Cheers  

There Is Nothing Wrong With Your Television. Do Not Attempt To Adjust The Picture.

Imagine your self filling an RTA with fresh juice, only to have the worst vape you can endure as you cough up a lung. No its not a dry hit. Do you blame the juice or a clogged up coil? In this episode, I will take a short journey and explore to a better vape.


After a week of chain vaping, over 50ml of juice, a mix of 3mg and 6mg Nic, the rayon wick has finally given up and no longer produced a clean vape. After visual inspection, the coil and the wick has indeed had a significant build up from juice. To the point that I could no longer see wick material between a spaced coil.

After discarding old wicking material and cleaning the coil, i wicked an RTA with fresh Rayon and filled it with juice. My favorite tobacco juice has come a live, i can now take long and deep direct lung hits with enjoyment. My taste buds are intoxicated, as my lungs fill up with smooth and silky vapor with every inhale.


Keep an eye on your coil by visually inspecting it on daily basis. Trust your body and your taste buds when a juice no longer tastes as it should. Re-wicking your RTA/RDA on regular basis or every few days, will help you eliminate many concerns and issues that you might be having with juice flavor or vaping experience.

It only takes ten minutes to rewick, and in return you will continue to enjoy many hours and days of pleasurable vaping experience.


Good Night.  

Found A Great B&m Near Me

So today I decided to go check out a B&M that is near me, but further away from the other B&M's closer to me. The place is called The Vapor Lounge and it is located in Warwick NY. If anyone ever finds themselves in the Hudson Valley, I highly recommend checking this place out. Went there to check out some different brands and flavors of juice, ended up leaving there with some new juice, a new mod, and a new RDA (and my first one at that).

The Vapor Lounge Warwick NY

Spent quite a bit of time talking with the owner, Zack, sharing stories on how and why we got into vaping. All his prices either matches, or is slightly better than prices you can find online. Ended up buying a SX Mini M Class ($200), Freakshow Mini ($25), a couple of JMK WD Pico+ drip tips ($20 each), and a couple of other delrin drip tips with a stainless steel cover ($5 each and shown in the picture). I also picked up two bottle of Voltage by the Juice Guys in 3 mg and a bottle of Dragonaire by Tasty Cloud in 6 mg.



Zack recommended the Freakshow Mini as a good starter RDA that gives great flavor. He spent over a half hour walking me through and showing me how to build a nickel coil for it and wicking it with cotton as he built me a coil for the Freakshow Mini, and he didn't charge me for the coil building. He then walked me through all of the options in the menu of the SX Mini. They do have a rewards program where you earn $1 for every $10 you spend on hardware, so I've accumulated enough points on this one purchase for a bottle of juice. As I left, he said to come back whenever I have any questions or issues, even if it is with stuff that I did not purchase from him.

He has definitely earned a lifetime customer.  

Cotton In Coil Not Absorbing Juice

I have a smok pen 22, I have been using smoozie Maui Waui e liquid. I have to either wait a while for the juice to soak every few long hits or I have to drop some juice down the top. I tried loosening the cap different amounts it doesn't seem to help, some people said it would. I'm not sure if I need to use different E-liquid like a clear one or what, but I hate having to wait in between hits especially if I already filled the vape with juice. I tried priming the coil when I first got it there was no good there.  

My Complete Setup (mod, Rda, And Juice)

Hey everyone, I just wanted to post my setup here, nothing to fancy so just take a quick look and feel free to leave a comment or reply.

To kick things off I've got a Seeker Mech Mod by EHPRO. It's a sleek design, all copper, and easy to press button. Little short and thick for those of us who like our setups to look beefy.

Atty- The Tobh Atty. It is a pain in the butt to take apart from the get go but once you get a bit of juice on all the O rings it comes apart fairly easy. Good deck to build on all pre-drilled holes on the three posts 1(+) and 2(-) (Obviously). Deep basin to hold plenty of juice for our drip and drivers safety. My current build is a dual single coil coming in at 0.28 ohms. Using a regular cotton wick.

Juice- "Bliss" made by The Artisan Vapor 100%VG This juice is an explosive flavor of fruits, and for being 100%VG it has a heavy flavor. 39ml bottle runs at 20$ not to bad for a good juice. When I drip with a full basin it lasts roughly an hour, and I heavily use my vape.

Battery- This thing is one of the best right now but I'm still limited on what builds I can do. My 0.28 is safe, however my 0.22 is unsafe (Go figure) ANYWAYS! (Specs) MNKE IMR-26650 3.7(low) 4.2(High) 3500mAh.

So I think that's all. Thanks for reading guess, and questions or comments just drop it down below. Goodbye and VAPE ON!
 

Max Vg Tobacco Flavors Ejuice??

Im pretty much freaking out right now, I have been vaping the same juice for 7 years and I just received the 3 bottles that I ordered and I went through 8 coils thinking I had bad coils, well it wasn't the coils I went and smelled my juice and it smelled like a burnt coil with a mix of burnt plastic. I called and they said they didn't change manufactures so I'm assuming something went wrong in the lab. Anyhow I have 1 good bottle left and that's only 30ml, I vape USA #1 from Ecig pros and hopefully they fix it otherwise I'm going to have to wait until they get there next batch which will be a while, because they just got this batch. So I need to find a new juice to vape for now, I prefer max Vg and tobacco flavors but not with the Carmel or dark colors. I love a little nutty flavor, so please can you give me some names juice and where to get it. Also I don't do the salt nic. Thanks so much  

Got A New Tank..

So I decided to get another clearomizer and the Donner by Amigo Itsuwa is what I got to replace my Aspire Atlantis.....
So here are my thoughts on it and it's just My Opinion:

Holds 4mls of juice - holds more juice so I'm not refilling my tank 2-3 times a day
.50hm Coil head is cotton & Kanthal wire & a wire mesh around the opening for better wicking ( You can use Atlantis coil in this thing and it's better in this tank then it is in the Atlantis) It comes with 2.
There's no notches or trying to center the coil head. It sits in the Clearo and just sucks juice lol
Great Flavor sub-ohm - The flavor you get from this is amazing, I was a little taken back bc I chose a sour raspberry and it really was more sour tasting then in any of the other tanks I had the same juice in
I personally like the drip tip but it's not for everybody
Adjustable air flow control is a wide slot - It's a slide around, but the draw from almost closed to full open is nice any way you wanna vape.
Vape production is great I use 10/90vg - 20/80vg


There are some things I don't like about this tank...
Priming the coil is a process - on a fresh coil the directions state to drop a few drops onto the coil, then once tank is filled let sit for 1-2 minutes prior to use. On your second fill of the clearo you have to let the coil sit for 2 minutes b4 use....I kinda wanna fill and vape, not fill and wait
Holding 4mls of juice is great, but if you can't vape 1ml of juice at the bottom of your tank it sucks. You can't vape the last ml of juice because the coil head sits to high so it can't wick the remaining juice.
I did find that when I put the Atlantis coil head in that the wicking was alot better then the coils that it came with, now this could be bc I am using a high vg juice.

So let's talk price....I bought this at a B&M so I paid A LOT more then what I've found online.
My price was $45.00
I have found these online for as little as $23.00
and for this price I would probably buy it again, not for $45.00
Iv'e been vaping on this for about a week now, I've gone through 2 coil heads in 4 days & now put the Atlantis coil head in it and am having better luck with it.
So there's my thoughts on my new clearomizer.  

Pg With Sub Tank?

I am using my isub tank and waiting till I get my liquid delivered but have no juice I was wondering if I could pick up some cheap puff e juice till it arrives. I just thought I seen awhile back that pg is harsher with sub ohming. pretty sure puff e liquid is a 70pg and 30vg just figured I'd ask before I go spend money.  

After A Full Year I Can Vape Again!!!! Yay!!!!!

its been a year since i had a allergic reaction to a juice (banana suicide) and i haven't been able to vape... i just choked...and i had to resort back to smoking... i know .. i know... and ive had a sinus cold the last few days so i went to the local vape shop bought a small bottle of juice since i didn't want to smoke while sick and tried it..yesterday....and what do you know...... IM SO EXCITED i can vape!!