Your Opinions On Cellucotton

Hello ECF,
I've been using cellucotton for a couple months now seem to last longer that cotton. I think it's a good wicking material wanted to here some other opinions about it.  


Similar Content



Rayon Maybe?

I was looking around at wicks and decided I finally wanted to try Rayon.
The fun part is, I started looking on eBay and noticed a small inconspicuous baggy (o.o!)
It appears exactly the same as a small bag I got as a sample from ordering from a few places-
Cellucotton 100 Rayon 36 ft 3 Packs Unbleached Cotton Vape Atty RDA RBA Wick | eBay
Looks exactly like this! But no label!
It was a "Freebie" so I have no idea, the note that came with it was "Here's some wick for you to try! Thank you for ordering!"

So...how would I tell if it's rayon or just cotton?  

Silica Wick?

Hi,
I'm posting because I just encountered some silica wick on ebay while looking for pre-built coils and different kinds of pre-built wire.
I've only used cotton so far- gonna get some rayon eventually but I think I'll order some from USA, people here in UK buy the rayon in bulk from US and resell it by meter for ridiculous price. And whatever material Smok supplies with their RBA heads for TFV12 tank (I must say this material was pretty good, used it both in smok tfv12 rta and berserker mini rta, wicked well, tasted fine and lasted slightly longer than my normal muji cotton. It's gone now so I can't post a picture.).

Anyway- I tried to research here about silica wick but the latest posts were from 2013. Same on youtube- bunch of old videos. Found a thread with a few posts on reddit from like 3 years ago with some folks saying they still use silica wick, claiming the taste is cleaner, you can't physically burn it, you can dry burn it, lasts longer etc.
Why is it not popular anymore, why has it disappeared? Is it worth giving a shot? What are the disadvantages, as clearly there were some advantages I found, but there must have been a reason for folks to abandon this material (other than the one mention below)?

Wicking the coil itself is not a big concern for me, I've read about trouble to get it through a coil and I think I know how to deal with it.

Thanks  

I Need Opinions On A Good Starter Kit For A Newbie

My friends been vaping for a couple months now and when she started she got a buck naked skinny. recently the tank that came with it started leaking, I'm pretty sure the tank that comes with it is a disposable correct? What would be a good starter kit for her?  

What's Everyone's Favorite 50w Mod?

I'm looking for an inexpensive box mod to carry around and wanted to know what everyone's opinion was.

I'm looking for something fairly small, spring loaded pin, removable battery... And looks good lol

So i'm looking at the smy 50w right now but wanted to get some other opinions.  

There Is Nothing Wrong With Your Television. Do Not Attempt To Adjust The Picture.

Imagine your self filling an RTA with fresh juice, only to have the worst vape you can endure as you cough up a lung. No its not a dry hit. Do you blame the juice or a clogged up coil? In this episode, I will take a short journey and explore to a better vape.


After a week of chain vaping, over 50ml of juice, a mix of 3mg and 6mg Nic, the rayon wick has finally given up and no longer produced a clean vape. After visual inspection, the coil and the wick has indeed had a significant build up from juice. To the point that I could no longer see wick material between a spaced coil.

After discarding old wicking material and cleaning the coil, i wicked an RTA with fresh Rayon and filled it with juice. My favorite tobacco juice has come a live, i can now take long and deep direct lung hits with enjoyment. My taste buds are intoxicated, as my lungs fill up with smooth and silky vapor with every inhale.


Keep an eye on your coil by visually inspecting it on daily basis. Trust your body and your taste buds when a juice no longer tastes as it should. Re-wicking your RTA/RDA on regular basis or every few days, will help you eliminate many concerns and issues that you might be having with juice flavor or vaping experience.

It only takes ten minutes to rewick, and in return you will continue to enjoy many hours and days of pleasurable vaping experience.


Good Night.  

First Experience With Rdas - Some Advice Please

I got my first Derringer today. Wanted to try it immediately although I bought it with the DAY AFTER (May 2106) in mind... but you know how it goes, you get a new toy and you want to try it out.

I'm really not into very low ohms so first I went for a single coil - 26 AWG Kanthal, 9 wraps for around 1.3 ohms. But I didn't like the way that could be wicked in an rda. So then I put in two 28 guage coils which I had previously coiled for my other atties. Together they gave me .8 ohms which is sort of ok. But I still am not quite happy with the wicking. These coils are 2mm internal diameter and there's not a lot of cotton you can put in there. The taste is good but my wicking is nowhere as fat as I see in some pics online.

Any advice?  

Converting People (willingly And Accidentally)

Hey guys and gals,

So I've been vaping for a couple of months after being on the stinkies for about 10 years, but my father has been in it for many years. This has lead to me skipping a great deal of rookie mistakes and learning how things work quite fast. This resulted in having a decent build in a community that has either no or bad opinions on vaping. I'm from a smaller town in Croatia, and if anyone mentions vaping it's what they've heard from the news on how bad it is (mostly the ever present study of old clearomisers fired at 5V).
After a month or two i was so enthusiastic about it i wanted to share it with my smoking friends. Trying to explain the possibilities, the fine tuning, ranging from wicking, atomizer types and coils to DIY juices. Some were interested, others were not.
Lately though, perfect example tonight, unexpected things started happening. I was out in my local pub, tootle puffing on my vamo5 and veritas and somebody i barely know came up to me asking what that was. I gave him a puff at 8W with my DIY 10mg VG chocolate peanut butter and he was thrilled. Friday night and he was like "just tell me what to order and i'm taking it right now".
I feel as if there's about to be an avalanche of vapers in my town and i'm loving it. This is the fifth or sixth person that has fully committed to dropping the analogs and switching to vaping in a very short time period, I'm gonna have to hold a class soon for all the basics

Have you guys from smaller towns had similar experiences? Because i feel that all the bad media regarding vaping is having little to no effect once a smoker takes a puff. Of course the problem is "making" the sceptical ones actually take the first puff due to the propaganda, but in my experience, once they do it's almost always a done deal!
God i hope i'll have someone recommending me flavors and atties in a couple months  

Tips On Wicking / Re-wicking

It's about that time that I have started to re-wick the OCC coils in the subtank. Looking for some performance tips. I'm currently using Muji japanese cotton which is working well and this is what I have noticed...

too little cotton, the atom will leak and burn easily
too much cotton; no issues burning at all but the flavor is muted.

I've re-wicked 5-6 times this week to experiment. With the Muji sheets, I cut about 5-6mm strip, remove 1/2 the thickness, then after threading through the coil, I will cut about 4mm from the end and stuff it back in the OCC head.

What are your tips and preferred materials?  

2nd Build

Okay so not sure if this is the right section or not but its the only relevant place I could find. .

My first build was okay coils turned out fine but the wicking and position of the coils where terrible. So I decided to have another go.

Opinions appreciated.

Using smok xpro m80
Plume veil v1.5 clone
26gauge kanthal
Wrapped around a 2mil precision screwdriver.
8 or 9 wraps can't remember.
And reading at .46 ohms

P.s don't know why the coils look like there glowing purple but I promise their not haha.
 

At My Wicks End!

I'm at my wicks end with this whole rebuilding thing!

Having given up anologs with my Nautilus Mini, I thought I'd treat myself to an authentic Kayfun v4.

My first rebuildable. It vapes great, lots of dense smooth vapour, but the cotton tastes awful!!

Tried cheap cotton from the chemist. Tried Koh Gen Do. The best so far has been Klaud cotton, but there's no denying it. While the vapour is superior to my Nautilus the taste is no where near as good.

Everything in my Kv4 tastes of cotton with a hint of the juice flavour.

I've watched all the videos on you tube, it's wicking fine, but cotton just tastes bad!




7wraps, 3mm ID, 28g Kantal, 1.4 Ohms.

Promised myself a Vapor Flask DNA40 for the Kv4. But if I can't get it tasting better
then this the Kayfun can go in the bin, I'll stick with the Nautilus Mini's on iStick 20w's.