Evic Vt

So I've been off on and on and off again with the e-cig in an effort to cut down on the smoking. I average about half a pack a day, sometimes more, sometimes less.

Up until last Saturday, I was using an eVic with an Aerotank 2 and while it seemed to quash my urge for a cigarette most of the time, the times the eVic seemed to not want to work right really pissed me off.

Then out comes the cigarettes.

Well, I decided that I wanted something better and I needed something better.

Local deal for the following:

A Sigelei 100w Plus in mint shape, a Kanger Subtank mini, a Nano, batteries and charger. All for 100!

Stopped and got some juice for it, (strawberry banana milkshake at 9mg).

Running the box at 26.6w on a 1.2 coil.

WOW FREAKIN WOW ..... I can definitely see the satisfaction!

Never thought I'd care about the bigger clouds, but DAMN, it's psychologically pleasing.

I think it will be easier to kill the cig use.  

Evic VT 60W by Joyetech PREORDER | Vape Street


eVic VT 60W PREORDER

ONLY $65 DURING PREORDER!!

Presenting the eVic-VT 60W, its new cutting edge technology of temperature control, embodying the concept of a healthy alternative lifestyle. eVic-VT features a super large OLED screen, supporting VT-Ti (Titanium)/ VT-Ni (Nickel)/ VW mode, and battery capacity of 5000mah.
The Variable Temperature (VT) brings out a different flavor experience with the change of temperature settings, not only improving the taste,but also saving battery and liquid consumption. eVic-VT is not your typical vape, it’s an evolutionary start.
Features:
Size: 47*25.5*85.6mm
Capacity: 5000mAh
Output mode: VT-Ti/VT-Ni/VW Mode
Temperature Range: 100-315℃/200-600˚F
Output Wattage: VT Mode:1W-60W
VW Mode:1W-50W
Output Voltage: 0.5V-8.0V
Resistance Range: 0.05-1.0ohm for VT mode
0.15-3.5ohm for VW mode
Color: Racing Yellow, Cool Black, Dazzling White
eVic-VT Visual Display:
VT-Ti mode/VT-Ni mode/VW
Wattages/ Voltages
Atomizer Resistance
Battery power/Puff/Time
ETA: Approximately mid June 2015  

So i had mvp 20w, and the kanger subtank worked fine with 1.2ohm occ at 11-12w.

Just put it on the mvp 3.0 and does not fire. Does not detect ohm ( blinks like this "-.-")

what gives? I tried with kanger pro tank 1.8ohm coil and it works great.  

Ok so I know that kanger subtank .5 ohm coils are good for up to like fifty watts and the subtank 1.2 coils are good for up to 26 watts, my question is this kanger has released vocc coils pretty much the same coils they have for the aero tank , genitank ,etc except now they have organic cotton like the subtank coils. Is it safe to think that the 1,2 and 1.5 ohm vocc coils will be safe as the 1.2 and 1.5 subtank coils at the 26 or so watt range, if not how many watts are safe so I don't burn them to hell  

Eleaf iStick 50W with Kanger Subtank Mini

Eleaf iStick 30W with Kanger Subtank Nano  

OK, I enjoy my vape devices and think they are rather modern and sleek, but this may just take vaping to a whole new level:

Newest RDA tank 0.5 Sub-Ohm BPDC Coils Tank Genuine Kanger Subtank bamboo foot massager

 

I ordered a new version of the Vamo V7 varible voltage 40 Watt mod and I am wondering if the Kanger Subtank Nano with a 1.2 ohm coil would be a viable combination. I want to try this tank just for the better flavor possibility but since the Vamo V7 is only rated down to 0.8 Ohms, I figure that I would have to use the 1.2 Ohm coil that is supplied with the Nano. I'm not quite ready to start dripping at this point in my vaping experience but want to get close to it. Are there any other tanks that would work better with the Vamo V7 than the nano? Thanks in advance for the advice.  

I am new to the mod world and I entered the foray with an IStick 30 and a Kanger Subtank Mini. When I use an old cheapo tank that came off an earlier Ego my juice taste fine. It's a 2.7 ohm coil set at 7.5 watts at 4.5 volts.The problem is the taste with my Kanger hooked up. It is very harsh. I also do not get the same visible exhaust (sorry, but I can't think of another term ) I operate it at about the same watts. I have tried both a sub ohm coil and a 1.2 ohm coil. I have also tried different air intake settings. One thing to note: The cheapo tank gives me a much tighter draw (It's harder to draw in the air). I have adjusted the Kanger down to the smallest inlet and the resistance still seems very easy.

Would the difference in resistance of the coils affect the taste with running the same power. Do some juices just not taste good with different tanks? I must be doing something wrong. Maybe I assembled it wrong by leaving out something but for the life of me I can't see what? I did insert a little piece of cotton in one of the coils which was foreign to me.

Any ideas? Fire away and don't assume anything. Again, I am ignorant with these mods so I am learning here. Thanks a bunch  

Hey guys I'm looking to upgrade from what I have right now which is the atlantis v1. I'm not a huge fan of the atlantis because of the inconsistency with the coils and the loss of flavor after 2 tank full. The atlantis v2 seems nicer with the occ coils and improved airflow, but I'm not sure if its worth the upgrade since I could just get the new 5-pack occ coils for my v1. The subtank mini still has better options with the occ coils and RBA. Also it seems the occ coils for the subtank is easier to rewick which could save me a few dollars.
I'm not sure which one to go with. I'm leaning more toward the subtank, but still not sure. Maybe someone who has either one or knows more about them could help me. I like to have a good amount of clouds while still keeping the flavor.

Or if anyone has a sub-ohm tank they could recommend that they like more than the ones I mentioned that would be good too.

I use an ipv2

Thanks  

I'm almost two years into vaping and it has been great.

I've been using a VW Ehuge 35 watt 26650 mod with a Kanger Subtank. Its huge and heavy but the battery lasts a long time. Also been using an Innokin Coolfire 2 with a Gladius tank.

Figured it was time to upgrade. Been watching several review videos to see whats out there. A lot of new sub ohm tanks and they all seem pretty good.

I've never had a box mod and figured it was time. Bought a Cloupor T6 recently to put my Subtank on. The T6 is supposed to be a 100 watt device. The Kanger coil only goes to 30 watts so no big deal there.

I really like the T6. Pretty small for a 26650 mod. Surface is slippery though, need to get a wrap for it. Butons are nice any clicky. The battery cover has magnets which is nice, no screw driver needed. Feels solid and the internals are clean. Its thick and the 25mm Subtank fits nicely on it.

Recently after watching some videos, I came across a new kinda unknown Sub Ohm Clearo. Its the Freemax Starre Sub Ohm. .5ohm or .25ohm coils. Mine came with the .5ohm. The .5ohm is rated 20-60 watts and the .25ohm is rated 20-100 watts. Reviewers were all impressed with the vapor and taste of this device. So I ordered one.

Wow, OMG, this Freemax Starre rocks. Blows away my Kanger Sub Tank in vapor production and flavor. Holds 5ml and the air holes are huge. Surgical Stainless Steel and Surgical Cotton used in the coil. Amazing.

After some more research, I discovered the Cloupor T6 really doesn't put out 100 watts. Well, that makes sense as its only a single battery device.

So went to the local vape shop today and bought a Sigelei 150 watt to put the Freemax Starre on. Will order some .25ohm coils soon.

Lovin the Sigelei so far. Magnets on battery cover, comes with a silicone gel case, nice clicky buttons, takes 2 18650. Its taller and wider than the T6 but not as thick. One thing it lacks that the T6 has is a USB charging port.

The Freemax Starre fits perfectly on it. The Kanger Sub Tank is wider than the Sigelei but fits perfect on the T6.

Really enjoying both of these box mods.

A few pics