Subtank Mini Rba Problems?

Just built first coil on subtank mini RBA and it works great otger than excessive popping hot juice to my mouth...any suggestions? ????  

Hey guys, I bought the Subtank Nano and loved it with the packaged coils.

I bought back-up coils that had a white insulator instead of the red, and the first one I popped in gave me such a severe sore on my tongue that I can barely talk. Both of them I've bought have really made it so bad and the flavor isn't good either.

I think they're clones that really have some bad coil material or something, but I can't tell... do the authentic ones have the red insulator?

Thank you!  

I've searched the forums and really couldn't find anything spot on with the problem I'm having, but if there is something I missed please forgive me. Anyways Ive been vaping for about 2 months now. I've had no problems with coughing and not being able to Vape up to now. I was using an Aspire Nautilis mini, and I decided to get a Kangertech sub tank mini. This is where the problems have begun. I'm coughing like crazy with this thing. I've done mouth to lung hits, let the it sit in my mouth before inhaling and still cough like crazy and it's only with this subtank I'm now using. I was using the 0.5 ohm coil that was on the unit. I switched to the 1.5 to see if that helped and it didn't. I've adjusted air flow, played with wattages and voltages and really no help. Is there a reason this is happening? What would be the cause of me having a coughing fit only when using this subtank? By the way I'm using a 50/59 mix of e juice.  

Just bought the Kangertech Subtank..... Was told I couldn't use my Max VG juice and I needed to buy some of their lower VG juice. I told the guy no thank you, I know what i'm doing and I can make it wick the Max VG.

Needless to say I got home, the STOCK OCC coil, .5 ohm, wicks my Max VG perfectly fine, even with chain vaping.

I ripped the pre-made coil out of the 1.2 ohm OCC head, and built my own .6 ohm coil in it, wicked it with Organic Cotton (Not KGD or Bacon, Just organic cotton from Walgreens) and it wicks perfectly fine with my Max VG.

I built a single coil .7 ohm spaced coil, wicked it with the double tails on each side, cut off to where it touches the deck, but not touching the threads, put the chimney cap on, and made sure the juice channel was free of blockage, and it wicks perfect with the Max VG.

No leaks, no dry hits, running each OCC head at 30 watts, and the RBA deck at 35 watts.

This is the original Subtank, 6ml for OCC and 4.2 for RBA, (NOT THE NEW 7.0mL version).

So let me hear it.... What have you guys noticed or seen about the wicking ideas, why has yours not worked?

WHY DO SO MANY PEOPLE SAY YOU CANT USE MAX VG ON RTA's, especially on the Kanger Subtank????  

Still semi new to vaping and have had my subtank mini for around a month and I have seen some unique builds lol, something that interests me and caught my attention is the vertical coil and to have the wicking around the coil instead of going through it. Has anyone tried this in the subtank mini? Pros/con's?thanks so much  

I am looking back at my spending this month, and I've realized the thing I used to get off tobacco and save money is now my full blown hobby and obsession. Bad? Nah - but it was eye opening and shocking! Recently (past 2-3 months) I've bought (this is just hardware. If I listed juices, this post would just be dumb long)

IPV Mini
IPV Mini V2
iStick 30w
Nitecore I4 charger (I2 became not good enough)
4x efest 18650 batteries (to add to the 4 I already own)
case to carry them all in while on the go
Atlantis 5ml extender
20 Atlantis coils
Delta II
10 delta II coils
Delta II RBA
Sense Herakles Tank
10 Herakles Coils
Horizon Arctic Tank
Pre-ordered Lemo II
Melo Tank
22ga, 24ga, 26ga, 28ga kanthal
ceramic tweezers
eleaf atomizer checker
wraps to protect/customize all my mods
Vape Life Drip Tips
Subtank Mini
Subtank mini OCC coils
Kayfun 4
Coil master kit
Screw driver sets
Torch
Butane for torch

Now I want the High Voltage tank

WHAT AM I DOING?! THE STRUGGLE IS REAL /endrant

My favorite so far: IPV Mini II rocking the Herackles tank at 55w - mmmmm

 

Hey guys and gals!! I've been a member here for a long time but I ended up going back to analogs for a while but now I'm back and very glad to see how the vaping community has grown so much.

When I left, RDAs were just getting popular but most rebuildable fans used genesis attys and hybrids. The community was no where near where it is today!

My brother just gave me a Sigelei 100w and a couple panasonic 18650's to get me off analogs and I dusted off my Opus D (DNA20). Also, just got a Kanger Subtank Nano in the mail.

I'm amazed, actually. When I went back to analogs the newest tank out was the protank 2 (I think). I'm glad to see how far we, as a community, have come.

I'm ordering supplies to start a custom Mod build so keep an eye out in the modders forum!!

Vape on!
Tanks  

Hello,
Does anyone know why with the original Subtank mini the coils that came with it were
a .05 ohm coil and a 1.2 ohm coil i have noticed with the new subtank it comes with a .05 ohm coil and instead of the 1.2 ohm coil it comes with a 1.5 ohm coil
does anyone know the reason for this
thank you  

Hey guys,

I'm looking for a tank and battery combo that subohm at . 5 but the tank has absolutely no juice spit back. I do know my atlantis and atlantis v2 have tiny droplets of juice that hit the tounge. So small that I don't notice it until I had someone point it out to me. I run 70pg, 30vg juice.

I'm looking for a setup for a friend with a tank that is small like the atlantis v1 or subtank mini with a small frame mod.

They currently have a I stick 30 so ideally I'd like a tank that works with that.

I will say thru personal testing the atlantis v2 will give me absolutely no spit back at 50 watts, but the I stick 30 cannot get to 50 watts.

If a new mod is needed, they will go with the new Kanger 50 box but my big concern is spit back. I'm talking I need a tank that has no spit back.

I'm looking at doing this in the smallest package I can. Ml capacity isn't a issue. Size and weight is the issue here too.

Rba tanks are out of question. Need something with replacement wicks.

Any ideas?

Sent from my LGMS395 using Tapatalk  

I found an "interim job" this week and decided to reward myself. I was originally stopping by the B&M to get another Subtank Mini as this job involves a 45 minute commute and I'd like another 'bigger' tank to take with me (almost got a regular sized Subtank, but it looked ridiculous on the VF and didn't feel comfortable), but they hadn't gotten them in yet, so as I was standing there browsing (as I always do if they don't have what I'm looking for), they said they got more RDA's in. So I looked, but wasn't thrilled with the one that was suggested first, so someone else suggested my new toy. It looks great on the VF! I already know how to build, but I asked about different flavor builds, so they sat down and showed me how to do twisted builds. They built me a twisted 28g single coil that reads ~0.6 Ohm. Holy cow the flavor! I know, I'm like a little kid discovering the swing set all over again for the first time. lol. So...what do you think of my new toy?