Used To Think "dripping Was Dumb".

I used to be one of those who thought the whole dripping thing was dumb.

After getting tired of buying coils for my atlantis, I decided to pop in to the store and pick up my first RDA.

I settled on the dark horse. I watched a short tutorial on youtube and built my first coil at 0.6 ohms.

Safe to say the atlantis and nautilis will go into retirement today.

I have never felt a nic buzz from vaping, but I can actually feel a buzz off this thing : I vape my atlantis at 3mg.

Also I love that I simply have to re wick and drip to try new flavours, and best of all NO MORE BUYING COILS.  


Similar Content



Atlantis 1 And 2 Interchangeable?

Hey guys I have an atlantis 2 and was wondering if I could use the Atlantis 1 5ml upgrade tank thing I don't like the size of the drip tip I'd much rather have the old smaller one and more capacity but with the new coils and airflow adjustment  

Just Thought I'd Share

well I finally got it in the mail today. And have really enjoyed vaping on it. Right now I just got the atlantis V2 on powerful plus mode. My atlantis nickel coils should be in Thursday so I can try out temp control in a couple of my tanks. I've also decided to try my hand at building even though I swore I never would. Got the mutation X V4 on the way as well. Hopefully this is a decent deck to build on. I am not a beginner really, I have wrapped a couple coils for my buddies and did a few builds on their attys. This vaping thing can get expensive! Vape they said, it'll be cheaper than smoking they said....pffft. lol
 

Atlantis V2 Questions

Alright so I have an atlantis v2 and I don't like the little 3ml capacity or the huge drip tip.. if I get the 5ml atlantis upgrade tank I'm thinking I can just throw it on my v2 and have the normal atlantis drip tip and more capacity but with the new coils and airflow Will this work how I'm imagining it?  

Can You Use Atlantis V2 Coils With Old Atlantis?

does anyone know If you can put the new atlantis v2 coils in the first atlantis?

and also if you can put atlantis v2 coils in the horizon tech arctic tank?  

Have Aspire Lost It?

So Aspire have announced an Atlantis 2 and Atlantis Mega along with a CF Maxx battery.
Will I purchase these? Yes! Am I excited? No!

Aspire revonutionalised the vaping world with the birth of the Nautilus. When the Atlantis arrived everyone was excited that Aspire had made a new model, and expectations were high! No way am I claiming the Atlantis is garbage, but after looking at it, there wasn't really a big wow. It just kind of looked small and boring! But performance is the main point!

KangerTech most likely Aspires biggest rivals had taken first place with their SubTank series! Although I hate Kanger! The more options and reliability were so much better than the Atlantis!

When I heard Aspire were releasing these I had high hopes that we would get an Aspire RTA with more Ohm option stock coils and a 50W 18650 MOD! But... Apparently the Mega tank and the MOD is 30mm so pretty big! Also it charges from a USB and there is no rebuild section! So all in all a few minor upgrades including drip tip changes and more airflow. But nothing that will make you want to buy one straight away. I'm an Aspire fan! I will support them and make a purchase regardless! Just think they could of done more!

One last thing! I was kind of put off of the fact they called it the Atlantis Mega! When there's Kanger AeroTank Mega! I would of thought they would make the effort and come up with something more unique!

Video he https://m.youtube.com/watch?v=swQHODWlqMA  

Ipv4 Tutorial

Hello everyone, I feel like I should post this in the Beginner's Thread. I bought an IPV4 today and it is my first temp control, non-built-in battery mod. I need help! LOL like with everything. I tell you my gear. The IPV4 of course, a Nitecore D2 charger, a pair of Imeren 18650 batteries, 5 Kanger OCC nickel coils and 2 .3 Atlantis coils. Along with an Atlantis V1 and pair of Kanger subtanks. Now I know, some of you are probably thinking people like me shouldn't have temp control but please humor me I want to learn.
Basically my first question is where do I start? How do I get to temp control on this mod? Where should I set it for these Nickel coils? Should I leave it at the same setting for regular coils? How do I get to joules? Where should I set those? Ok, let's just start with that. Is there a place online I can get a tutorial?
Sorry to be like a kid trying to learn to ride a bike, but as anyone that owns one of these things knows, the instructions don't say much. Thank you all for any help given, I know there are some real pros here.  

Vaping - The Obsession Is Real

I am looking back at my spending this month, and I've realized the thing I used to get off tobacco and save money is now my full blown hobby and obsession. Bad? Nah - but it was eye opening and shocking! Recently (past 2-3 months) I've bought (this is just hardware. If I listed juices, this post would just be dumb long)

IPV Mini
IPV Mini V2
iStick 30w
Nitecore I4 charger (I2 became not good enough)
4x efest 18650 batteries (to add to the 4 I already own)
case to carry them all in while on the go
Atlantis 5ml extender
20 Atlantis coils
Delta II
10 delta II coils
Delta II RBA
Sense Herakles Tank
10 Herakles Coils
Horizon Arctic Tank
Pre-ordered Lemo II
Melo Tank
22ga, 24ga, 26ga, 28ga kanthal
ceramic tweezers
eleaf atomizer checker
wraps to protect/customize all my mods
Vape Life Drip Tips
Subtank Mini
Subtank mini OCC coils
Kayfun 4
Coil master kit
Screw driver sets
Torch
Butane for torch

Now I want the High Voltage tank

WHAT AM I DOING?! THE STRUGGLE IS REAL /endrant

My favorite so far: IPV Mini II rocking the Herackles tank at 55w - mmmmm

 

Yep, I'm Hooked

When I first started vaping I always swore off building and dripping. I liked the ease of filling and vaping away. About 3 weeks ago I picked up my first rda. (Mutation x v4) it was ok and it leaked something awful so I set it aside. Well after watching mike vapes review of the troll I decided to pick it up. Just got it in today and threw a dual coil 24 gauge build in it. .came out to .34 ohms and vaping it at 60 watts on my m class. I haven't been able to put it down. I think I'm officially hooked on building and dripping. So glad I picked up this rda. Juice well is deep, holds lots of juice. For anyone who has been considering it, I'd recommend you pick it up. Here's a pic of my setup just for fun. I love my M class too! Vape on my friends!  

Am I The Only One?

Sometimes I feel like the Lone Ranger when it comes to RBA's, RTA's etc. I just can't stand them. I've spent more money than I care to admit buying wire, cotton, torches and all the other supplies. I've watched countless hours of "how-to" videos. I've built and rebuilt coils. Not to mention the money I've spent on various RDA's. After all this, I just love my Nautilus Minis with BVC coils. Nothing else is as satisfying to me. After 6+ years of vaping, they are my perfect set-up along with a nice VW box mod. Anybody else with me on this?  

Got A New Tank..

So I decided to get another clearomizer and the Donner by Amigo Itsuwa is what I got to replace my Aspire Atlantis.....
So here are my thoughts on it and it's just My Opinion:

Holds 4mls of juice - holds more juice so I'm not refilling my tank 2-3 times a day
.50hm Coil head is cotton & Kanthal wire & a wire mesh around the opening for better wicking ( You can use Atlantis coil in this thing and it's better in this tank then it is in the Atlantis) It comes with 2.
There's no notches or trying to center the coil head. It sits in the Clearo and just sucks juice lol
Great Flavor sub-ohm - The flavor you get from this is amazing, I was a little taken back bc I chose a sour raspberry and it really was more sour tasting then in any of the other tanks I had the same juice in
I personally like the drip tip but it's not for everybody
Adjustable air flow control is a wide slot - It's a slide around, but the draw from almost closed to full open is nice any way you wanna vape.
Vape production is great I use 10/90vg - 20/80vg


There are some things I don't like about this tank...
Priming the coil is a process - on a fresh coil the directions state to drop a few drops onto the coil, then once tank is filled let sit for 1-2 minutes prior to use. On your second fill of the clearo you have to let the coil sit for 2 minutes b4 use....I kinda wanna fill and vape, not fill and wait
Holding 4mls of juice is great, but if you can't vape 1ml of juice at the bottom of your tank it sucks. You can't vape the last ml of juice because the coil head sits to high so it can't wick the remaining juice.
I did find that when I put the Atlantis coil head in that the wicking was alot better then the coils that it came with, now this could be bc I am using a high vg juice.

So let's talk price....I bought this at a B&M so I paid A LOT more then what I've found online.
My price was $45.00
I have found these online for as little as $23.00
and for this price I would probably buy it again, not for $45.00
Iv'e been vaping on this for about a week now, I've gone through 2 coil heads in 4 days & now put the Atlantis coil head in it and am having better luck with it.
So there's my thoughts on my new clearomizer.