The coolfire z50 kit is the vape device that helped me quit smoking and start vaping one year and one month ago...it was a good choice cause I had no problems on my first vaping steps making the transition pleasant...
The z80 kit seems an impoved version in every way from the great z50 kit in my opinion...
Removable battery is always good to have....bigger size make it better to hold in the hand...very lightweight but also feels sturdy....great machining always from innokin and buttery smooth threads on the battery cap...
I still don't know if the Fourier vape tech with the new board can improve the coil life or the refresh makes any difference but I always like to see innovation and the mod performs very good that's for sur....the z coils already for me are great coils and very long lasting anyways ..
I also saw the 0.8ohm coil has bigger juice holes now!!!! I don't know since when this happend cause i have a stock of older coils and I also rebuild them...
I always thought the juice holes were kinda small for the 0.8ohm coil and sometimes on colder temps it couldn't keep up to wick 70vg juices in my opinion if u chain vape
I am very happy innokin doesn't settle and still making improvements and fine-tune their coils even tho they are so successful...
The zenith 2 is an improved zlide tank in my opinion maybe they chose to name it zenith caus the old zenith is a legend hahahaha
In fact is so similar u can swap the bottom airflows from the zenith 2 to the zlide if u wanted
its same dimensions as the zlide if u don't count the curves on the airflow ring and topcap,those curves btw make it look soooooo good
....it has wider chimney inner diameter that helps for direct lung vaping and it's not much bigger to affect the mouth to lung flavour in my opinion.....
it also comes with larger juice capacity cause the twist topfill mechanism that borrowed from the zenith takes less space and makes the tank be able to hold more juice than the zlide on same dimentions oh yeahhh....
the new airflow system is perfect....with small holes to be able to fine tune mouth to lung from tight to airy and a big slot to wide open and vape direct lung...
In my opinion is not just restricted cause it can be almost as airy as for example the hellvape destiny rta that is single coil direct lung rta.... The zenity 2 can supply the 0.3ohm z coil with all the air it needs and Vapes great...something that the zlide couldn't keep up...
Giveaways are back, with a great chance to win from our good friends at Innokin!
As before we're lucky to have the vaping legends @Dimitris and @pbusardo on hand to answer all your questions!
Enter the giveaway simply by posting in this thread and ask Phil & Dimitris a question about the CoolFire Z80, Zenith II, MTL Vaping, or anything else vape related that you have been dying to ask or would be useful for the vaping community here at ECF.
10 winners can choose either one of two options for their prizes;
Option 1
1 pcs Coolfire Z80 kit + 1 pcs Zlide tank
Option 2
1 pcs Coolfire Z50 kit + 1 pcs Zenith II tank
Colours will be chosen at random.
But wait!! There are also 5 Extra ECF Thread Grand Prizes:
1pcs Coolfire Z80 kit + 1 pcs Zenith II tank + 1 pack of Z-Coil + 1pcs Innokin hat
The 5 Grand prize packs will be given to 5 participants who ask the best, most interesting questions below, as chosen personally by Phil and Dimitris.
Winners must be of legal vaping age, only one prize per person, and this giveaway will run from July 9th to 15th.
Good luck & thank you for your support!
I am vaping very airy mtl but lately a lot restricted direct lung on a hellvape md with a small Clapton coil 30/40 7wraps or something ...at 23watts and with a full tank 4ml I get like 100puffs if I do direct lung like 3-4 seconds each puff...
Ok I know depends the time of Puffs and how much someone vapes and all that but I was wondering....
I was thinking to buy a zeus x rta and get also the mesh deck to have both...
The thing is I wonder since my hellvape eats Soo fast the juice ....
How will zeus with dual coil be...or the mesh with 4ml tank???
Anyone using it and how many times u refill per day hahaha must be a lot isn't it??
Maybe I should buy another rta with larger capacity??? XD
Hi, I am a mouth to lung vapor (just like smoking a cigarette). I use the Innokin Kroma A mod with the Zenith Tank. I use a 1.6 ohm coil at 9.5 watts. I know that there are better set-ups for me and am looking for suggestions. I am not a cloud chaser but just want good flavor and a coil that lasts. I don't know if I vape too much but I have totally lost the taste, I use Red Drop from Mountain Oak Vapors. I have always been weary of vaping at high wattages but don't know much about it. Please help!!! Thanks. Mark
I tried to charge it with two different micros USB wires and it no longer charges. So I guess I'll have to buy a new device to pair with the tank. Or maybe I should buy an entirely new set up. I suppose I could order another Adept Zlide, but does anyone know of a different mod device that is smaller than the Adept, fits the Zlide and has a decent battery? The Innokin Adept Slide is a bit too big for me. Any other starter kit recommendations would be great too. I'm not knowledgeable about vaping but I know I like it more than smoking.
So I decided to get another clearomizer and the Donner by Amigo Itsuwa is what I got to replace my Aspire Atlantis.....
So here are my thoughts on it and it's just My Opinion:
Holds 4mls of juice - holds more juice so I'm not refilling my tank 2-3 times a day
.50hm Coil head is cotton & Kanthal wire & a wire mesh around the opening for better wicking ( You can use Atlantis coil in this thing and it's better in this tank then it is in the Atlantis) It comes with 2.
There's no notches or trying to center the coil head. It sits in the Clearo and just sucks juice lol
Great Flavor sub-ohm - The flavor you get from this is amazing, I was a little taken back bc I chose a sour raspberry and it really was more sour tasting then in any of the other tanks I had the same juice in
I personally like the drip tip but it's not for everybody
Adjustable air flow control is a wide slot - It's a slide around, but the draw from almost closed to full open is nice any way you wanna vape.
Vape production is great I use 10/90vg - 20/80vg
There are some things I don't like about this tank...
Priming the coil is a process - on a fresh coil the directions state to drop a few drops onto the coil, then once tank is filled let sit for 1-2 minutes prior to use. On your second fill of the clearo you have to let the coil sit for 2 minutes b4 use....I kinda wanna fill and vape, not fill and wait
Holding 4mls of juice is great, but if you can't vape 1ml of juice at the bottom of your tank it sucks. You can't vape the last ml of juice because the coil head sits to high so it can't wick the remaining juice.
I did find that when I put the Atlantis coil head in that the wicking was alot better then the coils that it came with, now this could be bc I am using a high vg juice.
So let's talk price....I bought this at a B&M so I paid A LOT more then what I've found online.
My price was $45.00
I have found these online for as little as $23.00
and for this price I would probably buy it again, not for $45.00
Iv'e been vaping on this for about a week now, I've gone through 2 coil heads in 4 days & now put the Atlantis coil head in it and am having better luck with it.
So there's my thoughts on my new clearomizer.
Haven't vaped in like 8 years? So most of everything is new to me now..
But I did a little reading and I figured out a few things I need in a vape, but really there is so much, it's kinda hard to know what is good and what is not for brands and styles, so I'm hoping I can get some help by experienced vapers here.
I'm looking to quit smoking and here's what I'm looking for in a vape setup.
MTL Mouth to Lung setup so I can draw in and then inhale like a cigarette, but I would like a decent cloud. Not looking for huge, just good and maybe be able to slightly adjust what gets produced with using only 50/50 juice blends.
RTA setup? I need a rebuildable coil tank system.
I need to keep my maintenance cost low, so I need to be able to rebuild new coils.
No leak tank is a must. Needs to lay down on side on table and keep in pocket.
1 battery or 2. Doesn't matter much.
Would like a smaller mouthpiece compared to the larger style so I can get a good MTL draw.
Not sure what my options are for tanks and box mods or pen style? I think I need some kind of box mod? So i can slightly fine tune watts, volts to my coils if it just doesn't feel right and needs minor adjustments? Also like the option showing how many seconds used or draws.
There's so many tanks out there, but it's hard to tell what is really good.
The battery side, I really have no idea what I would need... watts, ohms, voltage.. with all the combinations, I can figure out what I really need..
Not looking to just be easy simple. I want good quality and I can only buy once.. I can't really afford it as it is, but I need to stop smoking..
But I want to buy once and be good for long time and not wish I bought something else. I just don't have the money to play around like that..
So I hope I can get some help here or suggestions to get me looking in the right direction for tank and battery side system.
Quality brands?
Brands to pass on because there is better options?
Imagine your self filling an RTA with fresh juice, only to have the worst vape you can endure as you cough up a lung. No its not a dry hit. Do you blame the juice or a clogged up coil? In this episode, I will take a short journey and explore to a better vape.
After a week of chain vaping, over 50ml of juice, a mix of 3mg and 6mg Nic, the rayon wick has finally given up and no longer produced a clean vape. After visual inspection, the coil and the wick has indeed had a significant build up from juice. To the point that I could no longer see wick material between a spaced coil.
After discarding old wicking material and cleaning the coil, i wicked an RTA with fresh Rayon and filled it with juice. My favorite tobacco juice has come a live, i can now take long and deep direct lung hits with enjoyment. My taste buds are intoxicated, as my lungs fill up with smooth and silky vapor with every inhale.
Keep an eye on your coil by visually inspecting it on daily basis. Trust your body and your taste buds when a juice no longer tastes as it should. Re-wicking your RTA/RDA on regular basis or every few days, will help you eliminate many concerns and issues that you might be having with juice flavor or vaping experience.
It only takes ten minutes to rewick, and in return you will continue to enjoy many hours and days of pleasurable vaping experience.
Good Night.
So I've been mouth to lung vaping since I started vaping. Started at 24 mg with the Halo Triton and when I upgraded to the iStick and the Nautilus I lowered my nicotine down to 15 mg. It's been fine.......getting enough nicotine so I don't crave analogs, not getting too much nicotine so that I start feeling sick. Throat hit has been fine and not uncomfortable.
Yesterday I started doing lung hits with the iStick and the Nautilus and with the greater amount of vapor I can produce, I stepped the nicotine down to 12 mg since I also started to get a little lightheaded (I suppose with the greater amount of vapor I am also taking in more nicotine, even though nicotine absorption through the lungs is not supposed to be as good as through the mouth and nose). The juice that I am using is also a 70VG/30PG mix as compared to the 50/50 I was vaping before. However this morning I woke up with an irritated throat and the vape (even when switching back to mouth to lung) feels more harsh.
Do I need to step down the nicotine level even more to 6 mg? Is this normal when going from mouth to lung to direct lung hits? I'm not subohming, so I didn't expect that I would need to drop it down that much. I'm afraid that if I drop it down too much, then I'm going to have more cravings and will need to vape constantly.
74 days without a cigarette so I’m still new to this whole vaping thing.
Started with Juul, got tired of refilling pods very quickly.
Switched to a Smok Nord. Have grown tired of the hit/miss with cools.
Just got my Zenith tank. Went ahead and got the Kroma/Zenith kit and it’s my first non-pod setup.
Like it so far. Only issue so far is there seems to be a lot of juice coming through when I take a hit. When I take a drag but put a thin white piece of cloth over the tip there is a very noticeable amount of brown stain on the cloth. Had the same issue when I got my Smok Nord but I corrected by switching from 50/50 nic salts to a 70v/30p freebase.
Currently Using the same 70vg/30pg 6mg Halo Tribeca.
Using the 1.6ohm coil;
Started at 14 watts;
Dropped to 11 watts and it reduced the juice but also the temp of the vape.
Adjusting the airflow doesn’t really make a difference.
Anyone else having the same issue with the amount of juice coming into their mouth? Is this normal with this type of setup? Did I flood the coil or something? I primed it with 5 drops then let it sit for about 10-15 minutes before taking the first hit.
Will probably limit it use at the house because I don’t want to carry around so much weight in my pocket.
Hey. I have a very annoying dry hit problem with my Innokin Zenith tank. I can't figure out what makes it happen. It happened on an used coil, so then i changed coils, but it happened again on the new coil.
I have 30% PG 70% VG liquid, didn't chain vape too much, had it on 14 watts, the tank was full, i had primed the coil...
Help is very appreciated!