Is It Safe ..

Bendy battery promises safe, speedy charging - BBC News


'Scientists have built a flexible aluminium battery which they say could be a cheap, fast-charging and safe alternative to current designs.
The protoype consists of a soft pouch, containing aluminium for one electrode and a graphite foam for the other - all surrounded by a special liquid salt.
It can recharge in less than a minute and is very safe and durable compared to lithium-ion batteries, but currently only delivers about half the voltage.'


Would be nice if it happened before my dotage.  

Herro!

So, I always used to use mech mods from about 6 months to a year and a half into vaping. For the last 6 months I've been on regulated (iStick 30W and 50W).

When I switched to regulated I retired my mech mods and 18650 batteries to the closet. I made sure they were all around 50% charged because I heard from someone on here that was the best condition to leave them.

Well recently I've had this curiosity to try them again, only for at home use, mainly for the novelty of it.

So, my question is, what will I have to do to revive these batteries? Are they safe to just throw back on the charger and use when fully charged? Or are they not safe to use?

Batteries: 4 Sony VTC 4's (all were acquired about a month before I stopped using mechs), 2 XTAR (Sony) VTC 4's (about a year old now) , 2 MXJO 2500mah (20A LG's) (about a year old now).

Let me know! Thank you!

Vape Happy,
Cullin Kin  

Is it ok to charge vaporesso revenger go and mini with a wall plug, using the cord it came with? There was no wall plug included with the kit. I usually charge it in my pc , so am wondering if a USB wall plug in adapter is fine to use as well?  

Hi
I'm usually vaping at just 14 watt (mouth to lung, nothing heavy).

Now I'm soon getting a new mod that takes 21700 batteries, so I'm searching for the best batteries without spending too much or too little.
(aiming for Samsung, LG or Sony, to be safe)

I see some batteries hold 5000 mah, like the Samsung 50E (cyan).
But it only has about 10 amp discharge rate.
So less than half than "regular" 4000 mah batteries for example.

Is 10 amp more than enough for vaping at just 14 watts, or should I find a more "high-drain" battery?
I want to be safe and avoid risks or heat.  

I bought my Sigelei 100w Plus a few days back and ordered 2 Sony VTC4's on my same order (I'm confident they're legitimate, I've bought some before) to be able to marry them together and use them with my Sigelei. Upon receiving the batteries, I labelled one A, and one B and put them into my charger at the same time (charger was off, put both in and turned it on), one battery is slightly more charged than the other (it's 2/3 bars, while the other is still 1/3). I'm a bit worried about using married batteries, I understand rotating A and B in my Sigelei and charger but will they be the same charge when they're done? They're new batteries and they both went on at the same time yet one of them is charging a little bit faster.

When both of the batteries are fully charged, will they be safe to use and cycle accordingly? I heard about if one battery has even a tiny bit less, the batteries will take an uneven load and it will make it risky. How do I ensure that these batteries remain married?  

Hey Guys,

I have been wanting to use a mech mod for quite some time now. But I didn’t want to rush into things, given that they can be dangerous if not used properly.

To prepare I have studied ohm’s law and have a pretty decent grasp on it. And have a calculator app on my phone.

I have checked out Mooch’s battery recommendations and have a good idea of what batteries to use and which to avoid.

I still do have a few questions I was hoping an experienced Mech user could help me answer:

- What would be the “sweet spot” as far as resistance and safety go for a dual coil set up? Obviously I want to go as low as possible and have a hard hitting vape. But I also want to be safe. I plan to use a dual 18650 Parallel mod (The Clutch X18). I would be most likely be using Sony Murata batteries as I cant find any Samsungs where i live. I’m thinking somewhere around 0.17-0.2? Or would it be safe to go lower than that? I will of course test my build on an ohm reader and regulated mod before throwing it on the mech to be safe.

- Are there any other general safety tips? Ive heard that you want to screw the Atty down all the way first, before inserting the batteries. And then insert the batteries. And when removing the batteries i heard you want to slightly unscrew the atty first, and then carefully remove the batteries? Can anyone please confirm if this is correct.

- Is its safe to chain vape on a dual 18650 parallel mod? When I say chain vape I mean like maybe taking 5-6 big hits back to back. Then waiting 3-5 minutes, dripping some juice and then doing another 5-6 hits.

- Is there anything I should be monitoring while I’m vaping? Like the heat of the batteries? From what I’ve read, the batteries drain quite fast on a mech. And after some experience you will just kind of know when they need charging because the vape experience changes. Is there anything I’m missing? Or something i should be looking out for?

- I can only vape in my kitchen. And sometimes there might be a little bit of water on the counter from someone’s drink sweating, or drops after someone washed their hands etc. Is this a risk? I will of course do my best to keep all surfaces dry. I’m not talking about large amounts of water or submerging or getting the mod really wet. But just what one might find on a kitchen counter.

- Any other tips you could throw my way would be great!

Thanks in advance!  

Hi Guys,

So I originally had a nitecore i8 charger that I used to charge 8 x 18650 batteries. After using it for a few days I started noticing that it made a weird ticking noise and got VERY hot on the bottom. Needless to say this made me quite uncomfortable.

So I exchanged it for a Xtar VC8. So far it’s been amazing. No ticking or weird noises and it doesn’t get hot. It also comes with a nice screen that shows you some details about your batteries. This is what leads me to my question.

I noticed when charging my batteries most of them show as roughly 3.7v but others show as 4.1v. Also the longer they charge the higher the number goes. Is this normal? Sorry I’m a total idiot when it comes to batteries and voltages etc. If anyone could clue me in i would be very great full!

Thanks  

Hi folks,

I recently purchases a Sigelei 100w box, and got the purple Efest batteries that the vendor recommended.
I'm using this with a KangerTech Subtank Mini.
It's currently set to 42W - 5.0V, and the resistance it shows me is 0.6 ohms.

I have some questions about my setup.

- I read some reports that these batteries have different specs than what is reported, and it could potentially be dangerous. What should I do to be safe? Is there a max W/V that I can set it to?
- I have a TrustFire TR-001 charger (output: 4.2V / 500Ma). Can I charge those batteries with that? I read the charger supports 18650 batteries, but I'd rather be sure...
- If the charger is no good, any recommendations of what I should be using?

Thanks a lot!  

Can I use an external battery pack to charge an IPV Mini?

I have a 10,000mAh external battery to charge my cell phone (Note 4, with a 3500mAh battery), which has 2 options for charging: 1.5v=1A and 2.5v=2.1A.

Is it recommended? Is it safe? Are there any precautions I need to take if I use the battery pack?

I haven't gotten around to getting an extra 18650 battery (and charger) for the IPV Mini. I've finally realized that it takes maybe 2-3 hours to charge the battery via the USB cable. But the one battery doesn't quite last me all day, depending on how heavy I'm using the Mini.

I usually carry a Volcano Inferno once the Mini dies, but the Volcano really sucks in comparison to the Mini. I'd love to be able to charge the Mini while I'm out and about.

I've added a pic of the external battery for specific information.


Thanks for all your help.  

Has two itaste vv 3.0's one of them will be a year old in two weeks and the second one will be a year old in May. Thought at first it was a fluke that the puffs from full charge to empty went from 350 down to 110 in less than a week now puffs are only 80 from full to empty on both of them. Charging them both like crazy until I can figure out what new shiny to buy. I am just shocked they are dieing as fast as they are about a years usage for under 60 bucks is not so bad though. Any suggestions looking for something similar but not with a fixed battery would like something with replaceable rechargeable batteries. Therefore not interested in the vv4 would like something that will last for more than a year.

Thanks guys & gals

Stonesfl