Coil Placing Question

Hello vapers! first! I'm a noob at this stuff because I just buy my tank and use it with the coils it comes with and second, my english isnt that good but I can understand it perfectly fine.

Anyway, Ive been searching everywhere but I couldnt find a solid answer to my question.
Im using an Aerotank Giant right now with a 1.8 ohm coil, if I put a 1.2 ohm I would have to use less voltage because I get a burnt taste and the coil burns pretty quick, Im about to order a Sub ohm tank soon and I'll use the stock coils, the one im getting is the Kangertech SubOhm tank.
Why do subohm coils use more voltage when normal coils use less?

I mean, Ive seen people do things like 0.2 ohm coil @ 100W + If I did anything over 3.5V on my 1.2 ohm coil itd burn instantly... SubOhm takes more voltage the lower you go and normal dual coils take less voltage the lower you go!

1.9 Ohm Dual coil = 3.7-3.8V for me
0.5 ohm OOC subtank sub ohm coil = 12-30W?!

Thanks in advance for taking the time to reply to this post and your patience!

Cheers!

Edit: by the way, Im planning to use my subtank with a 50/50 PG/VG 16mg nicotine, Is that ok?  

Hi all,

I have a quick question - I have been getting some inaccurate readings on my coils and I'm trying to figure out which is the closest to the real reading. I have an ohm reader I purchased at Mad Vapes that reads my coil at 1.93. I bought a new ohm meter from USA Ohm Meter (?) that reads it at 2.05. The Cloupor Mini reads it at 1.81 and the HCigar Heart beat reads at 1.83. Provari reads at 1.9. It is 8 wraps of 30 gauge Kanthal. Do any of these numbers even sound accurate?  

I've yet to buy a VW mod but i will be soon. However the outcome of this thread will dictate which one i go for.
Ive been looking at a few:

MVP 3 Pro (60w mod)
Itaste 50w mod
Coolfire 4 40w mod
Kanger Subbox Mini

For arguments sake lets say you have a 0.5ohm stock coil in an Isub G tank on the Istick 50w. You also have a 2ohm stock coil for it.
The mod is capable of supplying 50w to both the 0.5 ohm coil and the 2ohm coil. 50w is 50w right? So what, if any, is the benefit of putting a sub ohm coil in the VW mod?
The manufacturers market them as sub ohm mods, but why go sub ohm if the device is capable of the same wattage on a 1+ohm coil, the experience would be the same?

Which leads me to a similar question. Would any VW mod from say 30w capable to 60w capable basically give the exact same experience for the majority of users assuming the same tank is fitted?

I'm quite new to this but i hope my question is understandable
Thanks  

I've been vaping out of my new coil today and I noticed my coil is turning brown in 1 day! The flavor is tasting metallic and I make sure everything is full and don't chain vape is it possible to get a faulty coil? (pre-built coil) I also did prime it and even left it for 10 mins to fully soak.
Any help much appreciated hope everyone has a good weekend  

I'm new to vaping. I've went through 3 coils barely using them.


My issue is: When I first install the new coil and add the liquid, it produces vaporizes just fine. It seems like when I set it down for an hour or so, and go back, it still produces good vapor. But after a bit, if I set it down after vaping, and go back, it produced no vapor no matter how much I puff it. It seems like if I unscrew the part where the coil is, and run it under water, and then let it dry, and replace it, then add e juice, it'll start producing vapor again. But it seems like as soon as I set it down for a bit, and pick it back up, there's no vapor and I wash it out again, etc then it works, but eventually just stops producing vapor altogether u til I replace the coil.

What's going on here? am I doing something wrong? Do I need to adjust the coil some how? I've bought brand new coils and barely use them and this happens. Is the coil just getting gummed up? The coils don't make vapor after so long, and the usage doesn't even equate to a full day, maybe an hour or so.  

Hello
I have the wotofo serpent rta top airflow single coil tank now and I just purchased the augvape druga rta. Flavor is 100% better in the augvape drugA rta but juice leaks out the bottom of the tank every time which is why I have to stay with top airflow as it never has leaked on me. So I’m looking for a top airflow rta single coil . I typically vape between 20-30watts so I don’t need a powerhouse. I just want the flavor and don’t care about clouds. Can anyone recommend the best top airflow rta? The wotofo serpent works well but it takes a hit on flavor. The serpent only has 2 small air holes around the coil area and I think this is why it isn’t producing a good vape. I was looking at the Zeus? Augvape intake of the dual one? Or any others anyone can recommend ?

primary goal: outstanding flavor
No leaking
Lots of air holes around the coil


thanks for your time  

Hey guys I’ve been enjoying vaping for a few months now and I’m loving it.
I’ve learnt how to fix some leaks and backspits so I am happy with that .
But I have washed one of my coil cleaning it under tap water and left it to air out for a week cuz I used another coil at this time.


I’m not getting much juice and the cotton in the coil is quite hard. So I’m sucking mostly Heat vape
But it’s not terrible or anything?

What should I do ?

Kind regards  

So I just bought a new Nautilus 2S. I looked at YouTube videos beforehand and I saw that it has a leak proof system. But when I unscrewed the bottom to make sure that I have the right coil pre-installed, the entire bottom came out, similar to the Nautilus 2. Is all versions of the Nautilus 2S with this locking system or some don't have it? I tried hard to unscrew the very bottom but instead it came out like the 2 so I took off the glass and changed the coil, put the glass back, filled from the top and started vaping. Did I do something wrong?  

Hello,
Does anyone know why with the original Subtank mini the coils that came with it were
a .05 ohm coil and a 1.2 ohm coil i have noticed with the new subtank it comes with a .05 ohm coil and instead of the 1.2 ohm coil it comes with a 1.5 ohm coil
does anyone know the reason for this
thank you  

Hi everybody,

Just a quick question I’m preety sure of the issue just want some advice.

Using my Pulse 24 RTA and all I can describe this as is inhaling a Bon fire.


Sometimes when I put the top back on after dripping I guess the cap is pushing to tight on the coil? Which will then glow red and just blow out hot disgusting smoke, which I normally clock and don’t inhale but today didn’t and literally was coughing my guts up for ages.

Question is what is actually doing this to the coil? Am I right the lid is to tight and anybody had this before.

Also anything to worry about inhaling the bonfire

Thanks People.