Sigelei Top 1 Gui Problem

All of the sudden I wake up today and notice my 510 threading on my sigelei 50w box mod is jacked up. I cleaned the threads on my subtank mini and on my sigelei mod. I then tried screwing it onto my mod and now no matter what I try , there's a gap between the top of the mod and the bottom of the subtank (it's not screwing down all the way and has about a 3mm gap, hence now it won't fire...

I screwed my subtank onto my ileaf 30w and screws in flawlessly, so it's the sigelei threads ...

but I did pay a lot for my sigelei and prefer its hits , I dunno, I usually Vape about 16W on my sigelei And not sure how that translates over to what wattage I should run the eleaf at ?

Also, I just noticed that my spare RDAs will still screw onto my sigelei well..I'm so confused what's up !!!!  

Hey guys! i've been having a huge problem with my sigelei 100w ohm reader just jumping all over the place when i vape. it changes every few pushes and varies anywhere from .5 to 1.2 which is really obnoxious because when you dont notice it change you almost always get a dry hit. what do i do?  

Good evening ladies and gents! It's been awhile since I've been to this site. First off, I've been cigarette free for two years, eight months.

I first started with a pair of Ego Twists. They are still working with a lot of use! I decided to go with something that uses a 18650 battery and chose a E-Vic. That turned out to be a piece of junk. After that, I purchased a Z-Max which while being a good device, but hit the button wrong, and it will change settings. I thought it straight-lined (it didn't). I guess i hit the button wrong (again).

I ordered a Sigelei 50w V2, and have been using it for three days. I really like that it didn't cost an arm and a leg, $60 from BeVapeHappy. Yes, I could have spent $150, or more, but I have bills and such to pay.

The Sigelei is very simple to operate, and using 1.8Ω cartomizer and a IBTanked at 10w, it's amazing!  

Today i found a sigelei 50w vr50 on a site. My question is the sigelei 50w vr50 same as vr2 model just in a silver box?  

Hey all finally made the move to rda I am loving the flavor and hits I get. I got a tub boat clone and a mutation x v4 love them both . It was suggested by the vape shop to upgrade to a stronger box. I have a eleaf 50w . I would like to upgrade but not sure witch way to go . Is there anything new comeing out I should wait for or just get a ipv4 or ipv3 because it is 150 watt or go for the sigelei or any other suggestions thanx in advance  

Hi I just got a sigelei 100 watt plus and this is my first time using freshly charged batteries in it... it's still reading at being 100% in the sigelei. ive been using it for maybe 3 hours total . Is this normal .. because its starting to make me wonder if something is wrong. Its been at 40 to 50 watts this whole time. I didnt charge the batteries at first when i got them because my charger did not arrive yet...then once it did come i charged them and now its continuing to stay at 100%  

So I just received a 100w seigei box mod and I fully charged my 2 18650 batterys that worked fine in my mech mod. When I put them both in my sigelei the battery percentage only tops out at around 50% charged?!!! Like what they are for sure both fully charged. Anyone know what the problem is?  

I bought my Sigelei 100w Plus a few days back and ordered 2 Sony VTC4's on my same order (I'm confident they're legitimate, I've bought some before) to be able to marry them together and use them with my Sigelei. Upon receiving the batteries, I labelled one A, and one B and put them into my charger at the same time (charger was off, put both in and turned it on), one battery is slightly more charged than the other (it's 2/3 bars, while the other is still 1/3). I'm a bit worried about using married batteries, I understand rotating A and B in my Sigelei and charger but will they be the same charge when they're done? They're new batteries and they both went on at the same time yet one of them is charging a little bit faster.

When both of the batteries are fully charged, will they be safe to use and cycle accordingly? I heard about if one battery has even a tiny bit less, the batteries will take an uneven load and it will make it risky. How do I ensure that these batteries remain married?  

Has anyone ever done business with a company named Vaporizer Chief? If so, do they sell authentic products or clones? They have the brand names on their Sigelei 150W, however, I do not see the name Sigelei on the box mod itself.  

I have a snowwolf mini by sigelei kit and the mod has gone Haywire one day after the retailer warranty ended. My question is which warranty service should I contact? Sigelei is the parent company. Snowwolf is the branding that they're using I guess for this kit. Both sites have their own warranty contact information and I'm not sure which one to contact the little warranty card mentions nothing about the snowwolf but on the sigelei site the authenticity check does not work only on the snowwolf site so I don't really know which one to go through. If anyone's had any experience with this that would be great. I've heard mixed reviews but I would like to at least attempt to warranty this product seeing as how I've only owned two sigeleis and both of them went bad with in 31 days. It's worth a try anyway