Button Feels Rubbery

I have a smok rpm80 which is a aio pod system and when i am in a quite enviroment and press the fire button to vape, my ecig makes a noticable electrical buzzing noise. Is that normal and/or does anyone else have this problem or know how to fix it?  

I have had a lot of mis fires on my Smokless Owl 25.00 squonker and had to press down extra hard

and sometimes side ways to get it to fire.

I just done some contact cleaning and scraping on the Smokless Owl Button.

I took my wifes Emory board finger nail file thingy and depressed the firing button and held it depressed and rubbed it

across the firing pin and then took a small jewlers screwdriver and scratched it back and forth across the end of the pin and

did the same thing to botton ground pin.

I noticed some black color on the end of the firing pin before I started this cleaning process.

I gently took the screw driver and scratched back and forth across the positive and negative end of the battery just to

take any small film or oxidation from the ends just to make a better connection.

It seems to fire now just like it should with no MISFIRES---mod is now perfect !  

hi my smok 22 vape pen button is jammed in so the top bit is fully pushing in and the bottom is fully not pushed in. it’s not firing or anything when i don’t want it to so that’s good but it also won’t fire at all. idk how to add images  

So I recently bought a smoktronic abs box mod v2 and whenever I screw on a tank or rda on it, it fires without me firing it. What could be the deal and how can I fix this?  

I've got a couple of these little mods and both have the same problem. They continue to fire after the button is released. When it happens the display changes to the power on/off and keeps firing until the unit restarts (presumably after the 15 second cut off?). I can only think that the mod is registering 3 presses when I fire which triggers the screen change, and there is a bug which stops the release of the fire button registering. Anyone experienced this? Any fix? I'm surprised it's happening with two units so it must be happening to someone else!  

hi i have and endura Endura T18 vape and it is fully charged and full tank but when i press the button it goes orange and is still orange when i take my finger off the button but then it goes off. when i press the button the cape is not firing and doesn’t work. what do i do?  

So I dropped my mod yesterday right on it's ... and the button is stuck. Any suggestions on how to get it firing smoothly again?  

Hey all, I'm noticing on reviews that everyone says the istick 30 button rattles but on mine it's totally not rattling. Just wondering if this is normal? I just got it like two days ago. Does your istick button rattle? Thanks.  

Hey guys,
So I had bought a Smok V8 stick?  

Hi
I got myself second Caliburn and from the start I feel that auto firing is not as fast as my first one, just like a second or so behind. If I use the button it seems to be OK.

Also, it feels more airy. I check the same pod on both devices and first one seems to have a bit more restrictive airflow. Or, due to late auto firing, I am inhaling first clean air instead of vape, and thus, the feeling of less restrictive airflow.

And lastly, which is not a problem, but it is not feeling OK, second Caliburn pod latching thing feels more loose, where on the first, when I push pod into the slot, I can feel and hear distinctive click, on the second, just a very little bump and very shallow click.

Would first, auto fire delay constitute good grounds for warranty replacement? I got it less than a week ago.

Any thoughts?