Which 18650 Batteries And Which Charger For Vaporesso Luxe S?

Hi, a few weeks ago i just switched from a old Luxe to the new Vaporesso Luxe II 220w kit and in like two weeks i managed to melt 3x GT coils(GT, GT2 and GT4) then i switched to my old atomizer from the previous mod and so far, besides not having a good flavour or flow it at least works.
Any tips on what the problem may be?  

Hi folks,

I recently purchases a Sigelei 100w box, and got the purple Efest batteries that the vendor recommended.
I'm using this with a KangerTech Subtank Mini.
It's currently set to 42W - 5.0V, and the resistance it shows me is 0.6 ohms.

I have some questions about my setup.

- I read some reports that these batteries have different specs than what is reported, and it could potentially be dangerous. What should I do to be safe? Is there a max W/V that I can set it to?
- I have a TrustFire TR-001 charger (output: 4.2V / 500Ma). Can I charge those batteries with that? I read the charger supports 18650 batteries, but I'd rather be sure...
- If the charger is no good, any recommendations of what I should be using?

Thanks a lot!  

I am interested in setting up an Arduino charger for my vape batteries. But the charger I want to use, an Adafruit bq24074 solar charger, does not support nominal 3.6V batteries. And basically all the Mooch approved batteries are nominal 3.6V. So, which 3.7V batteries are considered fairly robust for high current, vaping purposes?  

Hello forum,

I have been lazy for a while and have been using disposable pods sytem. It is costly so im telling myself to switch back to refillable pods so hopefully i will get some feedbacks on what to get.

I already have an orion but what i also like about my disposable vapes is how lightweight it is, and the orion is not so light weight. Thinking about getting the vaporesso luxe q, what do you think?

i will also be needing new juice finding the right flavor to me has always been the tough one. Anyways, again im lazy, any suggestion which juice company ships juice with the skinny nozzle type bottle so i dont have to pour from one to another?

Last question .... i have once tried this azuki flavor and loved it, anyone has idea who makes azuki flavor?

Thank you all, in advance.  

Recommendations Please!

I loved this mod, but after 4 years needed to retire it due to shortened battery life.
Wismec/Jaybo RX mini
Reuleaux RXmini Kit

Bought this one next from Vape Wild and really enjoyed it, but after 3 months it completely stopped charging and wouldn't turn on. Never got wet and never dropped. Just very poorly made. That was money thrown away.
Geek Vape Aegis Mini
Geekvape Aegis Mini 80W Starter Kit

Got this one next, and it's been great, but the charging port has broken. Vapor DNA was great and they're sending a full refund.
VAPORESSO LUXE NANO 80W TC
Vaporesso LUXE NANO 80W TC Starter Kit – VaporDNA

So, now I need something new and am looking for advice for what to get. I really like the "mini" mods, but a long lasting battery and durability is very important too.

I would really appreciate suggestions.

Thank you!  

I wanna buy the sigelei oni edition 150watt but iv not used any box mods that require batteries yet, my jellyfish and innovkin has internal batteries, can you gents recommend 2 good batts and charger. and is there any tips i might need to know.  

I bought my Sigelei 100w Plus a few days back and ordered 2 Sony VTC4's on my same order (I'm confident they're legitimate, I've bought some before) to be able to marry them together and use them with my Sigelei. Upon receiving the batteries, I labelled one A, and one B and put them into my charger at the same time (charger was off, put both in and turned it on), one battery is slightly more charged than the other (it's 2/3 bars, while the other is still 1/3). I'm a bit worried about using married batteries, I understand rotating A and B in my Sigelei and charger but will they be the same charge when they're done? They're new batteries and they both went on at the same time yet one of them is charging a little bit faster.

When both of the batteries are fully charged, will they be safe to use and cycle accordingly? I heard about if one battery has even a tiny bit less, the batteries will take an uneven load and it will make it risky. How do I ensure that these batteries remain married?  

I've been charging my 18650 batteries on a Nitecore charger but having to unscrew my Smok XPRO m65 is a real pain so thought I may as well make use of the USB port and charge the battery while it's still in the mod.
But I've been hearing a few horror stories of other mods such as the clouper, apparently its not safe to charger using the USB port

I'd really appreciate it if anyone can help inform me if I'd be able to use my phone charging adaptor with my mod.

The input and output specs of my phone charger and mod input are in the attached pics.

Cheers everyone  

Hello everyone!

I have a smok al85 which i have owned for a good 2 years or so and ive been pretty happy with it. However i'd like to upgrade to a new mod kit- from research i have found 2 i like a lot- the vaporesso gen and luxe nano.

I need help choosing the right one- With a 220W mod, am i able to vape at 50- 60w with the appropriate coil without sacrificing flavour?

I like the nano, but i hear the battery is pretty bad, however it is cheaper than the Gen.

If anyone can help me out i'd very much appreciate it~
Thank you!  

I ordered two of these batteries from FastTech. The cheap price and high capacity (without having a mod or some awkward huge battery) attracted me to them. Some two weeks later they show up...

I have two Puff King chargers that came with starter kits we bought at a B&M store. We've been using them with Tripl3 eGo batteries, one Puff King battery (and another Puff King battery, which was taken back and exchanged for another eGo-T battery, which broke), and so far no problems screwing any batteries in. These two from FT show up however and neither will screw into one Puff King charger, but they both did into the other (same charger, down to the model number and everything). Now, one battery from FT still screws in, but the other doesn't.

I took the non screwing in battery to a local B&M store and the guy there was able to screw it into one of their chargers. He handed it to me, and I unscrewed it, screwed it back in, unscrewed it again, and then neither of us could screw it in again. Now I have one battery from FT that will screw into one of my chargers, but not the other. The other battery will charge, but it has to just like sit in the charger and hope the connection stays okay for it to charge. I still have no problems screwing any of my other batteries into either charger, just these ones from FT. Also, it's worth mentioning that the FT batteries never seemed to screw in right... it always felt weird and finicky getting it to go in.

What's up with these batteries? They claim to be eGo/510 threaded, just like my other batteries. They look just like my other batteries too, except they won't screw in right...