Wicking For Stickier Juice

Imagine your self filling an RTA with fresh juice, only to have the worst vape you can endure as you cough up a lung. No its not a dry hit. Do you blame the juice or a clogged up coil? In this episode, I will take a short journey and explore to a better vape.


After a week of chain vaping, over 50ml of juice, a mix of 3mg and 6mg Nic, the rayon wick has finally given up and no longer produced a clean vape. After visual inspection, the coil and the wick has indeed had a significant build up from juice. To the point that I could no longer see wick material between a spaced coil.

After discarding old wicking material and cleaning the coil, i wicked an RTA with fresh Rayon and filled it with juice. My favorite tobacco juice has come a live, i can now take long and deep direct lung hits with enjoyment. My taste buds are intoxicated, as my lungs fill up with smooth and silky vapor with every inhale.


Keep an eye on your coil by visually inspecting it on daily basis. Trust your body and your taste buds when a juice no longer tastes as it should. Re-wicking your RTA/RDA on regular basis or every few days, will help you eliminate many concerns and issues that you might be having with juice flavor or vaping experience.

It only takes ten minutes to rewick, and in return you will continue to enjoy many hours and days of pleasurable vaping experience.


Good Night.  

So I decided to get another clearomizer and the Donner by Amigo Itsuwa is what I got to replace my Aspire Atlantis.....
So here are my thoughts on it and it's just My Opinion:

Holds 4mls of juice - holds more juice so I'm not refilling my tank 2-3 times a day
.50hm Coil head is cotton & Kanthal wire & a wire mesh around the opening for better wicking ( You can use Atlantis coil in this thing and it's better in this tank then it is in the Atlantis) It comes with 2.
There's no notches or trying to center the coil head. It sits in the Clearo and just sucks juice lol
Great Flavor sub-ohm - The flavor you get from this is amazing, I was a little taken back bc I chose a sour raspberry and it really was more sour tasting then in any of the other tanks I had the same juice in
I personally like the drip tip but it's not for everybody
Adjustable air flow control is a wide slot - It's a slide around, but the draw from almost closed to full open is nice any way you wanna vape.
Vape production is great I use 10/90vg - 20/80vg


There are some things I don't like about this tank...
Priming the coil is a process - on a fresh coil the directions state to drop a few drops onto the coil, then once tank is filled let sit for 1-2 minutes prior to use. On your second fill of the clearo you have to let the coil sit for 2 minutes b4 use....I kinda wanna fill and vape, not fill and wait
Holding 4mls of juice is great, but if you can't vape 1ml of juice at the bottom of your tank it sucks. You can't vape the last ml of juice because the coil head sits to high so it can't wick the remaining juice.
I did find that when I put the Atlantis coil head in that the wicking was alot better then the coils that it came with, now this could be bc I am using a high vg juice.

So let's talk price....I bought this at a B&M so I paid A LOT more then what I've found online.
My price was $45.00
I have found these online for as little as $23.00
and for this price I would probably buy it again, not for $45.00
Iv'e been vaping on this for about a week now, I've gone through 2 coil heads in 4 days & now put the Atlantis coil head in it and am having better luck with it.
So there's my thoughts on my new clearomizer.  

I have an LE80 with a plume veil 1.5 clone on top. My coils are at .3 ohms. Im running them between 3.7-4v a few times at 4.2. I dunno if its just the juice im using, which is very dark and kinda old. But it just doesnt taste right, kinda burnt, but im not sure if its burnning the juice or the wick, well, im pretty sure its not the wick, cus you KNOW when it burns the wick. But, what do you think?






 

I can only get about a 1-2 day life span out of coils that are organic cotton based. After 1-2 days, they start seeping a dark colored liquid into my tank and ruining the juice. This has happened in my Atlantis tank running Melo coils vaping at 32 watts and my Herakles tank running 55 watts. Keep in mind I vape about 7-10ml a day. Juices are 70VG/30PG or 80VG/20PG all at 3mg nic.

On the flip side, if I vape old school Atlantis coils at 32 watts on the same juices, I get a full week before this happens.

Any ideas on how to make cotton coils last longer?! For this reason, I can't wait to get my Lemo 2 in. I'll be able to rewick daily and not worry about cost.

The way things are going, I am losing so much money on coils it's nuts. See picture to see whats happening.

Oh yeah, this is happening on all kinds of juices I vape. Mt Baker Vapor, Vista Vapors, 4 Pillars, The Milk Man. Some are budget juices - others are premium. No matter what juice I use, it happens.

The BIGGEST killer is Zeus Juice with 80%PG, 20%VG. This juice kills a coil in one tank full. I'm guessing the sweeteners in that juice do it.

It's frustrating because I LOVE my Herakles tank running at 55W but if I have to replace the coil every 1-2 days, that's SO expensive.  

I got my first Derringer today. Wanted to try it immediately although I bought it with the DAY AFTER (May 2106) in mind... but you know how it goes, you get a new toy and you want to try it out.

I'm really not into very low ohms so first I went for a single coil - 26 AWG Kanthal, 9 wraps for around 1.3 ohms. But I didn't like the way that could be wicked in an rda. So then I put in two 28 guage coils which I had previously coiled for my other atties. Together they gave me .8 ohms which is sort of ok. But I still am not quite happy with the wicking. These coils are 2mm internal diameter and there's not a lot of cotton you can put in there. The taste is good but my wicking is nowhere as fat as I see in some pics online.

Any advice?  

So....been vaping for 6 years.

For the last couple years I was using a Reo with an RBA at .5 ohms and was going through about 12-15ml a day. A friend of mine let me try his sub ohm tank a few weeks ago and I was hooked! The flavor was better than my Reo/RBA setup and the vapor was OMG.

Anyways, I've since bought a couple of sub ohm tanks with an IPV2 Mini, then graduated to a Goliath RTA with an SX Mini M Class. Using the Goliath with a .44 ohm dual coil at 30 watts on the SXM and I'm going through anywhere from 25-35ml a day! This just seem excessive....

Can anyone recommend an RTA that would use less juice but still give me a lot of airflow and flavor? I'm not all about the vapor, although I do enjoy it.

I'm guessing that if you want lots of airflow (I'm a direct lung inhale kinda guy) and a warm, full vape you pretty much have to vape at higher wattages/lower ohms and therefore use excessive amounts of juice...just wondering if anyone else has had a similar experience and has successfully cut down their juice consumption.

FYI, I DIY my juice so cost is not really an issue...I'm a bit concerned that using this much juice every day just can't be good for you.  

Im pretty much freaking out right now, I have been vaping the same juice for 7 years and I just received the 3 bottles that I ordered and I went through 8 coils thinking I had bad coils, well it wasn't the coils I went and smelled my juice and it smelled like a burnt coil with a mix of burnt plastic. I called and they said they didn't change manufactures so I'm assuming something went wrong in the lab. Anyhow I have 1 good bottle left and that's only 30ml, I vape USA #1 from Ecig pros and hopefully they fix it otherwise I'm going to have to wait until they get there next batch which will be a while, because they just got this batch. So I need to find a new juice to vape for now, I prefer max Vg and tobacco flavors but not with the Carmel or dark colors. I love a little nutty flavor, so please can you give me some names juice and where to get it. Also I don't do the salt nic. Thanks so much  

Just bought the Kangertech Subtank..... Was told I couldn't use my Max VG juice and I needed to buy some of their lower VG juice. I told the guy no thank you, I know what i'm doing and I can make it wick the Max VG.

Needless to say I got home, the STOCK OCC coil, .5 ohm, wicks my Max VG perfectly fine, even with chain vaping.

I ripped the pre-made coil out of the 1.2 ohm OCC head, and built my own .6 ohm coil in it, wicked it with Organic Cotton (Not KGD or Bacon, Just organic cotton from Walgreens) and it wicks perfectly fine with my Max VG.

I built a single coil .7 ohm spaced coil, wicked it with the double tails on each side, cut off to where it touches the deck, but not touching the threads, put the chimney cap on, and made sure the juice channel was free of blockage, and it wicks perfect with the Max VG.

No leaks, no dry hits, running each OCC head at 30 watts, and the RBA deck at 35 watts.

This is the original Subtank, 6ml for OCC and 4.2 for RBA, (NOT THE NEW 7.0mL version).

So let me hear it.... What have you guys noticed or seen about the wicking ideas, why has yours not worked?

WHY DO SO MANY PEOPLE SAY YOU CANT USE MAX VG ON RTA's, especially on the Kanger Subtank????  

I have a smok pen 22, I have been using smoozie Maui Waui e liquid. I have to either wait a while for the juice to soak every few long hits or I have to drop some juice down the top. I tried loosening the cap different amounts it doesn't seem to help, some people said it would. I'm not sure if I need to use different E-liquid like a clear one or what, but I hate having to wait in between hits especially if I already filled the vape with juice. I tried priming the coil when I first got it there was no good there.  

So I recently purchased a Pulse X 90w. And I've noticed that the squonk bottle is leaking inside the mod itself. And sometimes juice gets pretty close to the positive battery contact. Does anyone know what may be causing this? Whenever I fill the bottle I always fill it up to about 3/4 so that there is displacement for the tube itself. I get it all screwed down and back in then after a while, or my next fill I notice that it's leaked again. This is becoming a rather annoying problem. And I'd rather not chuck a mod that I just bought because of a stupid issue such as this. Any suggestions would be greatly appreciated. Thank you!