Help .2ohms Aegis Mini 80w Tc Bad Taste

I'm having trouble with my Jem Pen E cig - hopefully someone can help me.

I take the coil out clean the tank and battery area, put it back in with liquid + prime the coil. for about 5 minutes it tastes fine and is vaping as normal. then a really horrible burnt taste comes in which is unbearable to smoke and making my throat hurt.

I take the coil out and clean again, put more liquid. the same thing happens! it tastes absolutely fine again and then gets burnt.
any idea why this is happening ? the device gets quite hot too...
i don't think the coil is the issue because why does it taste fine for a few mins?
I've ordered new coils so going to try that but worried its the device. i've only had it for 2 weeks and changed the coil about 5 days ago.  

okay, so i had a problem yesterday where i would keep getting juice popping up on the draw, that problem is solved, however, now on only the second day of light use, on the 1.2 ohm coil that came with the tank i am getting a pretty harsh smokey taste. Its not overwhelming like it is when a coil is burnt out, just an unpleasant taste. I did 4 drops of liquid on the coil before using, everything is screwed in tight. Do i need maybe a couple more drops on the coil?

FYI: using an istick 30w burning at about 14.5-15w  

Hey there guys, new here.

I have a Vappresso Revenger Mini kit and I have upgraded my tank from NRG SE Mini tank to a "Geekvape Z Sub Ohm tank(Much Larger Tank)". Because I wanted to taste more flavor and still blow lots of clouds in the air with my vaping device being fairly cheap.
I put a New Geekvape Z series coil 0.4ohm 50-60W because I burnt my original 0.2 Ohm coil , I wont talk about my previous coil. I'm getting 2 problems here.

1. I'm using 60W, normal setting and every time I vape or inhale I get a taste of E-Liquid in my mouth. However its blowing perfect clouds and still getting an amazing taste but its just that the liquid drops in my mouth. I just want to spit it out every time. How do I fix that problem?

2. The other thing is if I use Higher Wattage and High settings the liquid pours out of the air flow and starts leaking and backspits in my mouth.

(Before I vaped with new coil)I put the new coil in, I soaked it for 10-15mins, while I fill half tank of E-liquid which is 0.8Ng/0.2PG. Then I inhaled 3-4x with no button pressed. Then I vaped to test, still leaking. I set the vape to 70W and high setting then blow downwards into the device 5-6x. All I was trying to do is desaturate it. My results got better didnt notice much of a leak but I still get a little bit of liquid in my mouth. If you can help me out here, I would much appreciate it.

Thank you and kind regards

Tuatara Vaper  

I am new to the mod world and I entered the foray with an IStick 30 and a Kanger Subtank Mini. When I use an old cheapo tank that came off an earlier Ego my juice taste fine. It's a 2.7 ohm coil set at 7.5 watts at 4.5 volts.The problem is the taste with my Kanger hooked up. It is very harsh. I also do not get the same visible exhaust (sorry, but I can't think of another term ) I operate it at about the same watts. I have tried both a sub ohm coil and a 1.2 ohm coil. I have also tried different air intake settings. One thing to note: The cheapo tank gives me a much tighter draw (It's harder to draw in the air). I have adjusted the Kanger down to the smallest inlet and the resistance still seems very easy.

Would the difference in resistance of the coils affect the taste with running the same power. Do some juices just not taste good with different tanks? I must be doing something wrong. Maybe I assembled it wrong by leaving out something but for the life of me I can't see what? I did insert a little piece of cotton in one of the coils which was foreign to me.

Any ideas? Fire away and don't assume anything. Again, I am ignorant with these mods so I am learning here. Thanks a bunch  

Hello, so i am a pretty experienced vaper (did it for a year or so, then quit and came back). Right now i have an aegis mini with a cerberus tank and a

I've got one that has me puzzled. I went through two fills of my Aerotank V2 with Cosmic Fog's Milk and Honey when it started to taste burnt. I figured no big deal, let me change the coil and clean the tank and all will be well. Well, new coil and cleaned tank and about 4 drags in it tastes burnt again. Thinking maybe I have a bum coil I try another one. Same deal.
I'm at a loss. It's the same bottle of liquid, same tank (cleaned each time), same battery (iStick 50w), same wattage (8.9), same resistance (1.2 ohm). Anyone have any clue what's could be causing this? It's getting expensive in coils and liquid!

Thanks  

Hello, so i have been vaping with this new Aegis mini kit with a cerberus tank that i bought a couple of weeks ago. I have used up the 2 standard coils that were in the box, but for some reason in my country i am not able to find specific coils for aegis mini kits online (I live in Belgium). My question is if there are any other (more available) coils that i could use in my cerberus tank? I don't want to pay like $30 just to have them shipped from the UK to Belgium to be honest as they should be aroun $16 for a 5-pack. I noticed i could get "Geekvape Cerberus coils", would these fit my cerberus tank? Maybe a dumb question but you can't be sure enough.

Thank you in advance!  

my tank's been on a leak streak. relatively new and still on first coil. haven't bought back ups yet, since i'm not sure it's a keeper.

I had to chain at high wattage (for coil) to get the gurgling to stop. might;ve burnt it. no dry hits thus far_ well kind of one... but mainly been bitter after today's fiasco.. i did fire it without inhaling a bit too.

the only discernible thing is a bitter taste sticking. is that an indicator of coil being burnt (didn't happen on my gear)?  

Sorry don't know if this is in the right forum.

I have had a mini nautilus for about about a week now.

I've been through so many threads on other people's issue with gurgling and can't find a fix.

I don't get spitting it's just the noise. It's really frustrating me.

I checked website for my mini and it is verified genuine.

Anyone with any suggestions?.

Tried everything mentioned else where. Tried new coil and still making noise. My coils are BVC that cake with verfied mini.

On very rare occasion it doesn't happen it seems to be when I'm on my car which is strange.....

It's leading me to believe it is a problem caused by temperature.

If I can't get this fixed then I'm going to just go back to using my profanity 2 which is a shame as the mini provides better flavour.

I don't see how it's got such good reviews..

Please help  

Hi, despite all the info on the internet these days, I ve been unable to find an answer to what is the life use of a wire on a rta coil (not the cotton or liquids) before it gets exhausted and become a bad element to health, maybe to the point of releasing metal particles that could go into the lungs... I know this is highly relative and depends on what kind of wire, liquids and vaping frecuency, but if I give you a straight case, maybe I ll make a good relation between other materials and their durability. It happened that during 2020, with the pandemic on full first impact, importations were very slow and in some cases, closed for long periods of time, I was trying to get some imported wires but I didn't have enough luck to find those I needed, just very thin wire for mtl equipment, which I didn't have. All was sold out from vaping websites... I ve managed to get a Zeus X rta and with it, the included premade coils (I think these are Nichrome)... Thing is, I used the same (and only) metal coil for almost 6 months, obviously replacing the cotton when needed (I had all the other materials, bags of cotton Bacon, tools, fresh liquids, etc), the liquid I ve been using is Don Juan sweet tobbaco and reserve, from King Crest. In those six moths I didn't vape all days or weeks, since finding or importing liquids were also a problem, so confinement and the lack of products, push me to smoke again, sadly, but I didn't give up and I start to build again the coil meanwhile the purchases arrive from other countries. The metal coil doesn't seems to be exhaust in plain view, it gets datk or black, as normally should be after several days of use and when tasting a bit burnt, but once I clean up with a brush, water and some short dry burning when building again, it gets back its grey metal color, not the same shine as a new one, but close. My vaping frequency was sometimes in chain, due to anxiety, but not all day or days and I was careful to rebuilt often. Mods are one Aegis X and one Smok P3, wattage I use is between 40 and 60 because even if the coils can be auto detected and suggestion is 75w, this is always overrated and burning taste triggers in 3 days. Only thing I did notice was sort of a metal taste for a period of time, that after went away and never got back. If someone wants to drop an answer, be welcome please, thank you all...