What To Do When Your Mod Is Spitting?

Ugh, its so annoying and burning the inside of my mouth.
I am currently using a Snow Wolf, tank and all.
And it spits every time I hit it. I have not cleaned the inside a million times, I don't over prime my coils. I don't know what else to do. Can someone HELP me please.....  


Similar Content



Very Tempted To Get The Sx Mini M Class, Not Sure If It's Right For Me Though.

Right now I have a few box mods, the IPv3, SIG 150w and the Snow wolf 200w. I'm using the Snow wolf 200w and honestly I'm not happy with it. I've had the button stick a few times causing it to auto fire and I'm noticing an almost one second delay from when I hit the fire button to when an actual vape starts to kick in (very slow fire up time, and I'm only running dual twisted 26g) on top of that I really dislike that I have to hit the fire button to see how much volts I'm using. I know the SX M class is one of the best out right now, but the fact it's a single battery concerns me because I typically vape between .12-.20 ohms and usually 60-80w (but since getting the derringer it's been 60). I really like the hot, dense flavorful vapes and I wanna make sure if I get the SX M class it'll be able to deliver that.  

A Bit Off Topic...but...

I know this sounds strange, but I just cleaned my computer (air dusted, took apart keyboard and cleaned, etc) and it seems a bit of cleaning sped up my computer.... webpages open much faster, the computer's more silent...overall a much needed thing. the only thing I can think of, is maybe the dust was causing the processor to overheat a bit and throttle down.

Relating to vaping.... It's much easier to clean a computer that has not been smoked around. This is the first time I've cleaned my computer since I smoked, and it was a whole lot easier. Many people don't realize how much the tar gets built up inside the computer, inside the heat sink on the processor. How much the dust clings to everything, the wires, etc. If you smoke around a computer, the tar gets sticky, and when dust gets around the inside of the smoker's computer, it's like a magnet for dust.

Come to think of it, I haven't had a bearing go bad in any of the fans in this computer since I've been vaping.

took it outside, used my air compressor and blew it off... it all came off and it now looks clean as a whistle. besides wiping the outside of the case, nothing needed to be de-tarred or wiped off.

The keyboard on the other hand... well.. I have a now 7 year old.. enough said.  

Nautilus Mini Spitting?

okay so i hope i'm posting this in the right place, but i have a nautilus mini that i've had since december and i just bought a new coil for it yesterday from my trusted local vape shop and it was working okay at first, but then it started gurgling and spitting juice into my mouth

this isn't the first time it's done this, i actually stopped using it for a while because of this problem (and the coils were old, so i thought that's what was causing it) but i just put a new coil in and it's still happening...

i have scoured the internet for reasons why this might be happening and i've tried every trick in the book and nothing has worked

PLEASE HELP!  

Mesh Coils Vs Non-mesh

I'm really new to vaping. Well I've had a snow wolf for awhile, I quit and picked it back up after I turned 21 because the smoking age in Virginia raised. But anyway I never got the difference between these two. Are there really advantages to mesh??  

Darn Cat Hair!!

Noticed two cat hairs inside one of my freshly rebuilt lemos just now... must have been on the vaper towel I used to dry the glass off last night. Flippin cat...

The two faint lines inside the tank...


Anyone else ever find floaties in their tanks?  

Sigelie Coils Taste Like Ebay Knock Offs

Im new to external battery mods but have been vaping for 3 years and I know how to prime a coil with e-juice. I go the extra mile after I prime the coil and let it sit for a minute. Then I fill up the tank put it back together and do not touch it for at least an hour or two just to make sure. I just got my now verified as legit sigelei sobra with the moonshot 120 both of the coils from that taste like those knock off BS eBay fake coils. I started off at a very low wattage and I don't know what's wrong both coils are disgusting. It's not exactly a burnt taste or a dry taste it's like a sour off taste and I can't use them. It also makes me feel like I have something in the back of my throat. What in the heck is going on? Do these coils take awhile to become usable? They're the coils that came with the mod and I verified the mod so I assume the coils are also okay. I even went so far as to try the second coil on a different mod but with the same tank just in case the mod was frying things the very first hit. Can anyone give me an idea of what's going on so I know what I need to do and also if anyone could tell me whether or not the Cascade baby coils will fit in the moonshot 120  

Increasing Ohm's On Coils

Hello everyone!

I did this pretty interesting experiment on using a set of coils for years.
I own a Digiflavor DROP RDA, on which I installed dual "Flat Alien Clapton" coils, each running 0.45ohm's on paper, and when measured, it was 0.21~ ohm's together.

Almost everyone says, when a coil turns black, trash it. But you can also burn the excess gunk, wash them, and reuse them a couple of times!
But what if I were to clean them all the time and vape further?

Well, after around 2 to 3 years of vaping, cleaning, and reusing the same coils, I can finally answer.

The coils are always on some kind of a flavour, even if you didn't drip a flavoured e-liquid. I ran through 20ml of pure sweetener mix juice, you still get a previous flavour, in my case which was chocolate.
The Ohm's over these years increased from 0.21~ to 0.24~ (Measured today).
The coils are always black or dark brown. Never to be cleaned like new. Each drip is full of taste, even after cleaning/burning excess off.

If you have any questions, be sure to ask!

That's all for today!  

Strange Burnt Taste

I've got one that has me puzzled. I went through two fills of my Aerotank V2 with Cosmic Fog's Milk and Honey when it started to taste burnt. I figured no big deal, let me change the coil and clean the tank and all will be well. Well, new coil and cleaned tank and about 4 drags in it tastes burnt again. Thinking maybe I have a bum coil I try another one. Same deal.
I'm at a loss. It's the same bottle of liquid, same tank (cleaned each time), same battery (iStick 50w), same wattage (8.9), same resistance (1.2 ohm). Anyone have any clue what's could be causing this? It's getting expensive in coils and liquid!

Thanks  

Switched From Cigs To Vaping Mouth Sores

I quit smoking and started vaping 6 days ago. Well the problem is I'm getting mouth sores (inside my mouth). Is it from quiting smoking or from vaping? Is there anything I can do to make them go away faster  

Help With New Falcon 2 Tank?

Hi I recently purchased the Falcon 2, using it with my aegis Legend. I’m new to vaping, so inexperienced. I’ve just burnt through two coils in two days. I keep getting nasty tasting e liquid in my mouth aswell as the coils burning super fast. Maybe I’m priming wrong, I’m also vaping straight at the recommended wattage (70w). Can somebody help, thanks.