2k18 Doggystyle Leaking Profusely

I busted my tank and my local store didn’t have another so I just decided to buy a whole new head/tank to go on my SMOK morph 219 mod. I asked the store clerk several times before I made the purchase if the tank I’m buying is compatible with my mod. He insisted it would work. Well now when I get it home and try to use my new tank on my mod (SMOK morph 219) it keeps asking if it’s a new coil with a different size every time. Any advice? And no I didn’t forget.... the new tank is a vaporesso cascade tank 7ml. 60.5X25MM 81g.  

I have a ton of 0 mg juice that I would like to make 3 mg Nicotine, but I don’t know where to buy nicotine, what type I need or how to mix it properly. Some of you are going to say search the forums but all the old threads I’m not interested in as things change everyday with products and techniques. That’s why I am starting a fresh post and need help in which would be greatly appreciated.

So that’s one thing I need help with.

Second thing I need help with is deciding which dripping atomizer would you recommend. I’m looking for something that’s came out recently that has good reviews. I don’t have much time to search for reviews so maybe you know what’s hot and what’s not? I know it all comes down to personal opinion and I would like your opinion please. (RDA Specifically is what I’m interested in.)

Thank you.  

Hi,

I just tried to TC vaping - and it’s awesome!

it was harder to build the coil, took me couple of tries, but once I reached R of 1.3, everything started to work.
I used 26awg wire SS316L (that’s what they had ready in the store).
I have no dry hits - at all, it’s just perfect. It’s like having on the fly automatically adjusted curve!

I do have one small problem- 1 out of 10 mod firing - (almost) nothing happens.
is it a problem (not good chip/mod, wire, else?), or is it intended? (Coil overheated, wick is dry, else?). But that’s a small nuisance - I wait 10 seconds and wape again no problem.

what I still don’t understand - why I was always told at the stores “don’t TC vape - it’s the old way, now VW is the way to go” without any explanation.
So far I have a feeling that it was done exclusively in stores interest:
- because they know it’s harder to built, so they didn’t want to have a complaining customer “it does not work”, because the mods for tc probably cost more so it’s tougher sell, and they wanted to sell me more coils, wick, juice...

are there other reasons against TC? (Safety, medical reasons (idk - SS wire releases particles or something - seems unlikely (I know with Ti and Ni you should be causious)), else?

I continue to research this topic as well, online, YouTube, etc, but so far I found nothing against, except what I already mentioned (mainly it’s a bit harder to build the coils).

Would appreciate your opinions!

regards,
Vadim

ps. I use EHPRO Cold Steel 100 mod, Siren 2 MTL RTA.  

Hello
I have the wotofo serpent rta top airflow single coil tank now and I just purchased the augvape druga rta. Flavor is 100% better in the augvape drugA rta but juice leaks out the bottom of the tank every time which is why I have to stay with top airflow as it never has leaked on me. So I’m looking for a top airflow rta single coil . I typically vape between 20-30watts so I don’t need a powerhouse. I just want the flavor and don’t care about clouds. Can anyone recommend the best top airflow rta? The wotofo serpent works well but it takes a hit on flavor. The serpent only has 2 small air holes around the coil area and I think this is why it isn’t producing a good vape. I was looking at the Zeus? Augvape intake of the dual one? Or any others anyone can recommend ?

primary goal: outstanding flavor
No leaking
Lots of air holes around the coil


thanks for your time  

Dear forum!

here goes my strange experience:
I’ve been coiling and wicking for years pretty much the same way, and it was kinda ok = I adapted to all the quirks I had.

Recently I built a new coil, but instead of 4mm I decided to make 3.5mm coil. Same wraps number.
Wicked it as I alway do - exact same material, thickness (adjusted to coil diameter of cores) trimming etc.

And wow!
No problem with TC now!
Works reliably, no leakage, I can chain wape the whole tank!

could this one Change in coil diameter choice did the trick???

Or is it a fluke? (Well I’ll find out when I’ll built next coil same way...but still)

best regards
Vadim  

Calculated I spent 104USD on average for this three month,it’s some money due to me buying all the necessary mod and pod plus juice.

If my mod did not gave up on me I would spend 55USD on average per month,while using drop in coil which I am very happy about it...How much did you spent on vaping stuff and how much on average would you spent if you didn’t had to chip in on devices.

I didn’t do rta/rda because I had many working hours and I tried one rta,it’s just a hassle changing the cotton or coil and I am a lousy builder hence I use sub ohm tank  

Bear with me all as I have to be a bit verbose.

I have a boxer bf mod I have numerous Rda I am vaping mtl a juice I’ve been vaping 5+ years.
I didn’t use my boxer or any rda for a while. When I did a rebuild as usual I noticed a “bad” flavour. Like most of you I went through a series of steps to no avail

I changed atomisers did a new build and soaked (vinegar, then retainer brite, baking soda and ultimately boiled) the other one I confirmed if I drip the juice tastes as expected I changed bottles and soaked (like above) the bottle I took apart the boxer and soaked the 510 (as above)
Obviously these cleanings weren’t all at once. I tried vinegar. Then when that failed I tried retainer brite (great to remove discolouration but leaves a slightly mint flavour for a few draws),when that didn’t work I tried boiling.

At this point I’m starting to wonder if something is going on with the way the mod is activating. The only thing left I can think of is that for some reason (and I’m not sure why it would have developed) when the metal bar contacts the ring on the 510/feeding tube area there’s some kind of charge that’s happening and raining juice or melting plastic (which I don’t see). Either that or there is some mould or something deep in the 510 assembly.

Have any of you ever experienced this kind of flavour terrible all of a sudden? I have now tried 4 bottles with four tubes. I have cleaned every element at least five times. I have confirmed I’m not just tasting it wrong by dripping.

it’s clearly not the atomiser or build related. I have a hard time believing it’s bottle related after what I’ve done to them.

I just cannot figure this out. The next step of course is going to be to try and use the same bottles /atomiser on another mod but I thought I’d ping you all to see what your thoughts are - because in ten years of vaping I haven’t experienced this, and troubleshooting has taken hours so far.

Just a few final points
no shorting Very minor sparks as you’d expect from this mod and the way it makes contact at an angle Been vaping a very long time and building since almost day one The rda’s are authentic, stainless etc I’ve tried 3 of them at least It’s not wire or cotton
I’m stumped. Appreciate any thoughts.  

I know, I know... this topic has been discussed to death. And, I am in the process of searching now.
I have a TFV8 tank that started leaking a week or two ago. I tried all the usual tricks (empty and clean all parts, don't over tighten, replace o rings, etc). Nothing helped. After a few days of covering the mod with a paper towel everytime I took a drag, I decided to buy a new tank. The new TFV8 arrived yesterday afternoon, and after checking it out and filling it with juice, it is doing the exact same thing.
We are not talking about a drop leaking here and there, it is leaking the whole tankful in less than two hours.

Any suggestions?

Thanks!

Sent from my SM-G965U using Tapatalk  

Hey Guys,

I have been wanting to use a mech mod for quite some time now. But I didn’t want to rush into things, given that they can be dangerous if not used properly.

To prepare I have studied ohm’s law and have a pretty decent grasp on it. And have a calculator app on my phone.

I have checked out Mooch’s battery recommendations and have a good idea of what batteries to use and which to avoid.

I still do have a few questions I was hoping an experienced Mech user could help me answer:

- What would be the “sweet spot” as far as resistance and safety go for a dual coil set up? Obviously I want to go as low as possible and have a hard hitting vape. But I also want to be safe. I plan to use a dual 18650 Parallel mod (The Clutch X18). I would be most likely be using Sony Murata batteries as I cant find any Samsungs where i live. I’m thinking somewhere around 0.17-0.2? Or would it be safe to go lower than that? I will of course test my build on an ohm reader and regulated mod before throwing it on the mech to be safe.

- Are there any other general safety tips? Ive heard that you want to screw the Atty down all the way first, before inserting the batteries. And then insert the batteries. And when removing the batteries i heard you want to slightly unscrew the atty first, and then carefully remove the batteries? Can anyone please confirm if this is correct.

- Is its safe to chain vape on a dual 18650 parallel mod? When I say chain vape I mean like maybe taking 5-6 big hits back to back. Then waiting 3-5 minutes, dripping some juice and then doing another 5-6 hits.

- Is there anything I should be monitoring while I’m vaping? Like the heat of the batteries? From what I’ve read, the batteries drain quite fast on a mech. And after some experience you will just kind of know when they need charging because the vape experience changes. Is there anything I’m missing? Or something i should be looking out for?

- I can only vape in my kitchen. And sometimes there might be a little bit of water on the counter from someone’s drink sweating, or drops after someone washed their hands etc. Is this a risk? I will of course do my best to keep all surfaces dry. I’m not talking about large amounts of water or submerging or getting the mod really wet. But just what one might find on a kitchen counter.

- Any other tips you could throw my way would be great!

Thanks in advance!  

With everything going on in the vaping world I was wondering if we’ll still be able to buy PG/VG premixed.
I buy premix PG/VG with nicotine already added so I’m wondering if I should buy 4 or 5 gallons to make sure I can get it.
Also I was told that if I buy a few gallons that I should freeze it or refrigerate it,is that right?
I sell mods and tanks so I have plenty to last years because I use to sell them on ebay until they ban selling them on the site.
I’m on private sights but don’t know what’s going to happen after April.
I live in New York so we already are have a juice ban so I mail it to a friend in another state and they forward it to me.
Now I’m buying premix so I can just flavor my own juice but I’m worried they might stop shipping premix PG/VG and then what will we do?
So any information on what’s ahead I’d appreciate your information. I’m new so I’m trying to learn how to find information on here.
Thank You