Looking For A New Vape - Suggestions?

I have been out of the game for a while and have just been using old mods/RTA's.

I am looking for suggestions on some of the best up to date mods as well as some of the best RTA that go with the mods.

Here is a little info...I usually vape at around 30-35 watts...

For the mod, I am looking for one that takes a single 1865 battery, is small in size, and is lightweight.

For the RTA, I am looking for a single coil DL tank....one that can hold at least 5ml of juice, can go with the mod suggested, and provides great flavor.

Can you guys please give me some suggestions? Thanks a lot  


Similar Content



21700 Mods

I am looking for a dual 21700 mod. The available ones, I probably will buy but, there aren't many to choose from. There are several single 21700 mods. My question is how long (on average) will a single battery mod charge last (I know this question is subjective). I vape around 65 watts, most of the ones I have seen online are rated 100 watts. I do not want to leave home and my mod die out because it was a single battery mod. I know I could carry a spare charged battery around, I just do not want to have to. Thanks  

Any Suggestions For High-wattage Internal Battery Box Mods?

I'm looking for internal battery box mods that has wattage option higher than 50 Watts. So far I've found Smok Xpro M80 Plus, which is an internal battery box mod with 80 Watts power at a great price. ($55) Is there any other internal battery box mods? MVP and Istick serieses are of course excluded here.  

A Tale Of Two Old Setups...

Greetings,

maybe I was bored. Maybe to much doom and gloom on all the bans of new gear and the shipping of it. I started to think - why not have some fun with some of the stuff I already have?



Cases in point - the two rigs in the picture above. I believe that all the hardware (mods and tanks) are over 5 years old. The setup on the left has a bit of a story about it.

Sitting on my desk is a few old tube mods that I wonder what it would be like to use again. I found a old (I think KFv3) tank laying around, built a very low mass 2ohm coil in it, filled it up and went and tried it out on my old 15W tube mods. Sadly not a one of them liked the KFv3 and would register the 2ohm coil. So what to do? I had a old Evic that surely could be put into power mode. While I was not to surprised that it all works (I've actually refilled the tank a few times and replaced the battery once) the vape is more restrictive than I tend to like and be it the build (or the 10W power mode) I don't really like the flavor of the unflavored juice with this. Another negative is that while it is top fill, there is no juice flow control so the atomizer get flooded each time the tank is refilled. While I could (and have) used it in a pinch, I can get 1-2 tank fills on a single 3000mah battery.

The setup on the right represents some historical firsts for me. Years ago when I first got into rebuilding a Lemo2 was one of three tanks I bought when I started. It was also my first top fill tank. Sitting under it is my first ever Dicodes mod (a #6). This mod is setup in TC mode with 380F temperature setting and 23W.

Be it the better tank or the use of TC mode, the setup on the right provides a good vape. The 26650 has enough mah to easily allow me to vape the tank dry (takes me most of the day) and since years ago I got Dicodes very over priced charger, I just drop the mod in the charger at the end of the day and its ready for more vaping in a few hours.

So, anyone else putting to use or having some fun with +5 year old vaping gear? How do you like it?


g.  

A Reborn Vaper Looking For Advice.

Hi forum,
I've been a smoker for 25 yrs. 2-3 PPD of lights. 7 yrs ago I started to vape and was able to cut back to 10 analogs a day. I used KR808 with cartos and then upgraded to Ego's with cartos and later tank atomizers. Dripping was never my game. A year and a half later, I stopped vaping and went back to cigs. Why? I got tired of charging, filling, leakage, dry burnt hits, modding ...etc. And I was not getting the satisfaction I needed.
A couple of weeks ago, I thought why not give it another try. So I got my boxes of eliquid and batteries out of the closet. I was surprised that all my Egos were still working (the KR808's are all dead). What's more surprising is that the eliquid is still good after 5 or 6 yrs. The flavor is still as good as it was. And the nicotine is still there. The TH, peppery taste and the buzz are still the same. So here I am, vaping again and I already cut back my cigs use to 10-15 per day.
I wanted to check the ecig world of today. And what's better than ECF. I've been at ECF for 6-10 hrs daily for a week now. And omg what a change!! VV, VW, TC, tanks, rebuildables, Subohms, NET, WTA, mods, mods and even more mods. Amazing! Hats off to the ECF family. I don't think all these advances would've been possible without ECF. Ideas are born here.
With all these advances I'm hoping that I'll be able to quit cigs completely. But it's really confusing and I need advice from the veterans here. As to my vaping style, I inhale M2L, use 70/30 to 40/60 pg/VG most of time. I chain vape !! 24 mg is the least that works for me. 36 mg is better. I like a warm (not hot) vape. I need a good balance of vapor and flavor. I'm not into mechs, rebuildables, dripping or modding. I like hassle free setups. fill, plug and vape away.
I want 2 setups. One for work and stealth vaping. Should be smallish (Ego size), does not look ridiculous, consistant and easy to use. box is ok but should be small. It should still have options that will enhance the experience. The second setup is for use at home. maybe a high end VV VW with TC. Damn! that Sx mini looks great. /But i'll wait before throwing away $200.
Sorry for the long post. But what suggestions and tips can you give for these 2 setups?
TIA  

Advice Needed For Rta Top Airflow Single Coil

Hello
I have the wotofo serpent rta top airflow single coil tank now and I just purchased the augvape druga rta. Flavor is 100% better in the augvape drugA rta but juice leaks out the bottom of the tank every time which is why I have to stay with top airflow as it never has leaked on me. So I’m looking for a top airflow rta single coil . I typically vape between 20-30watts so I don’t need a powerhouse. I just want the flavor and don’t care about clouds. Can anyone recommend the best top airflow rta? The wotofo serpent works well but it takes a hit on flavor. The serpent only has 2 small air holes around the coil area and I think this is why it isn’t producing a good vape. I was looking at the Zeus? Augvape intake of the dual one? Or any others anyone can recommend ?

primary goal: outstanding flavor
No leaking
Lots of air holes around the coil


thanks for your time  

Curious About Box Mods

Just got back from my local vape shop, i still ask questions 6 months into vaping. Not too mention they have various gear you can try out. So was curious what various box mods vape like compared to my Vamo 5 Nautilus/ Alantis sub ohm CF sub setups. Also got a ZNA 50 watt APV mod which i don't use much as it does drain the batteries really fast. I tend to use the ZNA 50 when my CF is on charge. I been vaping a lot on my Nautilus Vamo 5 set up a lot recently due to it being a lot kinder on my juice. Sub ohm vaping does love drinking juice like anything.

So my visit to the vape shop as made me curious about box mods in general as there some nice small compact ones out there. Was looking at box mods that can go up to 80 watts.

If and when i take the plunge as i'm just rolling it around in my mind at the moment. I'm not keen on the dripper's tanks so i would most be thinking about a box mod that i could attach a sub ohm tank on and one you could charge on it's own.


Any recommendations anyone ?

PS i love the new look of the forums! a major improvement.  

Origen V2 Flavor Build

I recently picked up an infinite origen v2, my first build was single coil 2.4mm and it was not good on flavor, next build was dual coil 2.4mm at .5ohms, it was better on flavor. No matter what single coil build I try the flavor is just not there. Any suggestions on great flavor builds???  

I Don't Want To Waste My Money

ive been looking at what I'm going to buy next for the past couple of weeks. My current setup is an iStick 30w and a Aspire CF with 2 Nautilus Minis. I'm thinking of taking the next step with a new regulated mod. One that either holds a single or dual battery or possibly a mechanical mod. I don't want to waste my money on something cheap that I will 'grow out of'. I am also thinking of going for a new tank or RBA or RDA. Is this the route I should take?

Suggestions on gear and new mods, etc. websites. Prices.

Thank you guys always  

Getting New Hardware This Week...don't Know What To Go With. Halp!

So I currently have an ipv mini that goes to 30 watts, a couple mech mods I never use anymore, and a Hana knockoff (didn't know, or wouldn't have bought. Got it back when I was a clueless noob).

I am insanely jealous of, and constantly use, my friend's Sig 150watt. What I like about it is just that, the wattage. I love vaping at 65-70 watts. Sometimes higher. So I know m just for the sake of saving money later, I want something that gets AT LEAST 100 watts.

But now these tempature regulated mods have hit the market and I have heard wonderful things about the flavor. But is there any that go above 100 watts worth knowing about?

So now I don't know if I should get the Sig 150, the ipv 3...or go down in wattage some but get tempature control. Any suggestions, help, and wisdom is greatly appreciated.  

Coolfire Z80 Kit Vs Coolfire Z50 Kit


The coolfire z50 kit is the vape device that helped me quit smoking and start vaping one year and one month ago...it was a good choice cause I had no problems on my first vaping steps making the transition pleasant...

The z80 kit seems an impoved version in every way from the great z50 kit in my opinion...

Removable battery is always good to have....bigger size make it better to hold in the hand...very lightweight but also feels sturdy....great machining always from innokin and buttery smooth threads on the battery cap...

I still don't know if the Fourier vape tech with the new board can improve the coil life or the refresh makes any difference but I always like to see innovation and the mod performs very good that's for sur....the z coils already for me are great coils and very long lasting anyways ..

I also saw the 0.8ohm coil has bigger juice holes now!!!! I don't know since when this happend cause i have a stock of older coils and I also rebuild them...

I always thought the juice holes were kinda small for the 0.8ohm coil and sometimes on colder temps it couldn't keep up to wick 70vg juices in my opinion if u chain vape
I am very happy innokin doesn't settle and still making improvements and fine-tune their coils even tho they are so successful...

The zenith 2 is an improved zlide tank in my opinion maybe they chose to name it zenith caus the old zenith is a legend hahahaha
In fact is so similar u can swap the bottom airflows from the zenith 2 to the zlide if u wanted

its same dimensions as the zlide if u don't count the curves on the airflow ring and topcap,those curves btw make it look soooooo good

....it has wider chimney inner diameter that helps for direct lung vaping and it's not much bigger to affect the mouth to lung flavour in my opinion.....

it also comes with larger juice capacity cause the twist topfill mechanism that borrowed from the zenith takes less space and makes the tank be able to hold more juice than the zlide on same dimentions oh yeahhh....

the new airflow system is perfect....with small holes to be able to fine tune mouth to lung from tight to airy and a big slot to wide open and vape direct lung...

In my opinion is not just restricted cause it can be almost as airy as for example the hellvape destiny rta that is single coil direct lung rta.... The zenity 2 can supply the 0.3ohm z coil with all the air it needs and Vapes great...something that the zlide couldn't keep up...