Getting Appropriate Diameter Of Rayon?

I was looking around at wicks and decided I finally wanted to try Rayon.
The fun part is, I started looking on eBay and noticed a small inconspicuous baggy (o.o!)
It appears exactly the same as a small bag I got as a sample from ordering from a few places-
Cellucotton 100 Rayon 36 ft 3 Packs Unbleached Cotton Vape Atty RDA RBA Wick | eBay
Looks exactly like this! But no label!
It was a "Freebie" so I have no idea, the note that came with it was "Here's some wick for you to try! Thank you for ordering!"

So...how would I tell if it's rayon or just cotton?  

Hi,
I'm posting because I just encountered some silica wick on ebay while looking for pre-built coils and different kinds of pre-built wire.
I've only used cotton so far- gonna get some rayon eventually but I think I'll order some from USA, people here in UK buy the rayon in bulk from US and resell it by meter for ridiculous price. And whatever material Smok supplies with their RBA heads for TFV12 tank (I must say this material was pretty good, used it both in smok tfv12 rta and berserker mini rta, wicked well, tasted fine and lasted slightly longer than my normal muji cotton. It's gone now so I can't post a picture.).

Anyway- I tried to research here about silica wick but the latest posts were from 2013. Same on youtube- bunch of old videos. Found a thread with a few posts on reddit from like 3 years ago with some folks saying they still use silica wick, claiming the taste is cleaner, you can't physically burn it, you can dry burn it, lasts longer etc.
Why is it not popular anymore, why has it disappeared? Is it worth giving a shot? What are the disadvantages, as clearly there were some advantages I found, but there must have been a reason for folks to abandon this material (other than the one mention below)?

Wicking the coil itself is not a big concern for me, I've read about trouble to get it through a coil and I think I know how to deal with it.

Thanks  

Hi,

I just tried to TC vaping - and it’s awesome!

it was harder to build the coil, took me couple of tries, but once I reached R of 1.3, everything started to work.
I used 26awg wire SS316L (that’s what they had ready in the store).
I have no dry hits - at all, it’s just perfect. It’s like having on the fly automatically adjusted curve!

I do have one small problem- 1 out of 10 mod firing - (almost) nothing happens.
is it a problem (not good chip/mod, wire, else?), or is it intended? (Coil overheated, wick is dry, else?). But that’s a small nuisance - I wait 10 seconds and wape again no problem.

what I still don’t understand - why I was always told at the stores “don’t TC vape - it’s the old way, now VW is the way to go” without any explanation.
So far I have a feeling that it was done exclusively in stores interest:
- because they know it’s harder to built, so they didn’t want to have a complaining customer “it does not work”, because the mods for tc probably cost more so it’s tougher sell, and they wanted to sell me more coils, wick, juice...

are there other reasons against TC? (Safety, medical reasons (idk - SS wire releases particles or something - seems unlikely (I know with Ti and Ni you should be causious)), else?

I continue to research this topic as well, online, YouTube, etc, but so far I found nothing against, except what I already mentioned (mainly it’s a bit harder to build the coils).

Would appreciate your opinions!

regards,
Vadim

ps. I use EHPRO Cold Steel 100 mod, Siren 2 MTL RTA.  

Does old coils have any negative affects?

I typically burn off the gunk on the coils and put it through a good rinse then change my wick every few days. This was especially true when I'm using standard kanthal on the Protank.

I recently switched to a Solomon 3 using claptons. I find that there is very little gunk on the coils, I still burn off what I can before replacing the wick. I usually change the coil every week and one wick in between. On this one however, I'm 2 weeks on on the same coil and had only replace my wick once using the same liquids that I normally use on the Protank.

What I notice is the vape isn't as smooth as if I were to put in a fresh coil. I think I just answered my own question but what do you guys have to say about it?  

First off, I would like to say that I’m very new to vaping. I started off with a JUUL, then a Smok Novo 2, and eventually got sick of buying pods.

Now I have a Hellvape MD, and an Ares 2 - the first provides better flavor, but it’s still not comparable to what I was getting in my pod systems. I just recently purchased a BP Mods Pioneer, and I’m hoping that gives me better results. I’m using an Aegis Mini for a mod.

I’m trying to figure out what I’m doing wrong, because it’s really frustrating to spend all this money for worse flavor, when I was hoping it would let me save money.

I have about 40 bottles of salt nic flavors that are 50 or 35 mg, and a couple 3mg freebase I bought (120ml for $7 seemed like a steal). I would really like to get away from the salt nic, but I seem to get even worse flavor from the 3mg.

I’m using 2.5ID 28ga SS316L round wire from Master Wire Supply (I have a spool) with Puffs Organic Cotton. My coils are usually .7ohms, but I’ve tried up to 1ohm. I’ve also tried 1 ohm Vandy Vape Superfine MTL fused claptons, and experienced similar results.

I’m using the MD with the most restrictive airflow settings (3 small hole airflow disk), low (2-3) adjustable AFC setting. I have my coil as low as possible to the airflow, and I have thinned / fluffed my wicks.

I haven’t tried adjusting the airflow below the coil on the Ares 2, because the video instructions say wide open airflow below the coil is the best for flavor (I have found the opposite to be true for the MD).

Can someone provide me more insight?

Will 2mm ID coils with the same amount of wraps taste better than 2.5? Do coil ohms do anything for flavor, or does it only change how fast it heats up? Will I lose flavor if my coils hang outside the diameter of the airflow disk?
Is there a certain type of coil that would give me better flavor than regular round wire?

I use TC at 420F 20 watts


Any kind of feedback is appreciated and if I left anything out or you have questions about my set up that could help me out please ask! I’m at a loss on what to do, and it seems like no amount of research is helping  

Imagine your self filling an RTA with fresh juice, only to have the worst vape you can endure as you cough up a lung. No its not a dry hit. Do you blame the juice or a clogged up coil? In this episode, I will take a short journey and explore to a better vape.


After a week of chain vaping, over 50ml of juice, a mix of 3mg and 6mg Nic, the rayon wick has finally given up and no longer produced a clean vape. After visual inspection, the coil and the wick has indeed had a significant build up from juice. To the point that I could no longer see wick material between a spaced coil.

After discarding old wicking material and cleaning the coil, i wicked an RTA with fresh Rayon and filled it with juice. My favorite tobacco juice has come a live, i can now take long and deep direct lung hits with enjoyment. My taste buds are intoxicated, as my lungs fill up with smooth and silky vapor with every inhale.


Keep an eye on your coil by visually inspecting it on daily basis. Trust your body and your taste buds when a juice no longer tastes as it should. Re-wicking your RTA/RDA on regular basis or every few days, will help you eliminate many concerns and issues that you might be having with juice flavor or vaping experience.

It only takes ten minutes to rewick, and in return you will continue to enjoy many hours and days of pleasurable vaping experience.


Good Night.  

I have a ton of 0 mg juice that I would like to make 3 mg Nicotine, but I don’t know where to buy nicotine, what type I need or how to mix it properly. Some of you are going to say search the forums but all the old threads I’m not interested in as things change everyday with products and techniques. That’s why I am starting a fresh post and need help in which would be greatly appreciated.

So that’s one thing I need help with.

Second thing I need help with is deciding which dripping atomizer would you recommend. I’m looking for something that’s came out recently that has good reviews. I don’t have much time to search for reviews so maybe you know what’s hot and what’s not? I know it all comes down to personal opinion and I would like your opinion please. (RDA Specifically is what I’m interested in.)

Thank you.  

Dear forum!

here goes my strange experience:
I’ve been coiling and wicking for years pretty much the same way, and it was kinda ok = I adapted to all the quirks I had.

Recently I built a new coil, but instead of 4mm I decided to make 3.5mm coil. Same wraps number.
Wicked it as I alway do - exact same material, thickness (adjusted to coil diameter of cores) trimming etc.

And wow!
No problem with TC now!
Works reliably, no leakage, I can chain wape the whole tank!

could this one Change in coil diameter choice did the trick???

Or is it a fluke? (Well I’ll find out when I’ll built next coil same way...but still)

best regards
Vadim  

Two weeks ago I was rewicking my rta because I wanted a change of flavour and was changing flavour every 2 days as I am using only one mod.Anyway,I am always frustrated when I wicked badly,meaning it leaked or the vape quality is not up to my usual standard.I had wicked this specific rta for hundreds over time the past 3 month as it is my first rta.I learned to wick properly after almost 30 trial...that day after I wicked,it leaked when I am about to go out to play sports with my friends.I thought my wicking had no problem before I leaves but I find that it leaked all over my bag,and I was in a very bad mood because of that...that prompted my gf to asked me to quit and I promised her that I will do it.The next day I passed all my mod to her and started to used nicotine gum,I don’t planned to quit nicotine as I find it really benefits my mental health and make me focus on work better.While using nicotine gum,I started to use lesser and lesser and then wanted completely off it as it was so boring even though I got my nicotine fix well.Yesterday I couldn’t take it anymore,somehow I convinced my gf to return my vape and promised her I will quit in the future if we got married or had babies.

In the meantime,I also ordered a new mod and now a sub ohm tank so that I don’t need to wick everytime I change flavour as I will be switching different coils on different flavour.I am excited, and hoped that this mod and tank will be able to keep me satisfied.I am addicted to vaping,not smoking and to me personally,vaping is harder to quit simply because I enjoy vaping a lot more then smoking.I love vaping,I am also worried if I had to quit someday...  

So a juice im using is gunking up coils quick. I hate dry burning (it leaves a bad taste no matter how careful I am) and I've read you can re wick it with 1mm wick.

I heard ekowool is good, will that work? if so, what kind do I get hollow,cotton core or silica core?
And would I have to boil/clean the wick before I use it?

thx