Hey y'all I'm wanting to try out a Zenith mtl tank to replace my egoOne v2 since I can no longer get the CLR coils and am not willing to rebuild them.
I mainly want recommendations on which online stores are the best to purchase the tank/coils from. I've been out of the loop for a few years and the store I always purchased my CLRs from doesn't carry the Zenith.
Also wondering if anyone knows if the pmta is gonna have any impact on the availability of the Zenith tanks or coils in the near future? I'd hate to try it and like it and purchase more just to find out they're extinct. I appreciate any help.
Hey - vaped for a LONG time. Mostly MTL tanks and I have been using the Zenith for a couple of years which I really like, but I'm too hard on it. I vape too much. Anyway, I've started using thicker liquids 70/30 and it's even more difficult for my Zenith. I do thin it out with a little menthol drops. But here's my question. I've been pondering going to a sub ohm tank but I just really don't know which to choose. As it stands, I'm thinking the falcon 2? Do their coils last long? Do the tanks leak even if liquid is thinned out a bit (not much). Anyway, if anyone has any recommendations, plz post reply. Thanks
So my husband and I bought two zenith II tanks and inokin 1.6 ohm heads. My husband has not been impressed with the lack of flavor that it produces. Mine has been ok but I’m wondering if I need to clean the coil often? I usually use a nautilus tank and coil that I would clean each time I added liquid. Any help is appreciated as we bought 13 packs of these coils
Hello,
I would like to ask if anyone had problems with 1,2 zenith coils? Do they last? Or they burn very quickly?
Every opinion will be really appreciated
Thank you
The coolfire z50 kit is the vape device that helped me quit smoking and start vaping one year and one month ago...it was a good choice cause I had no problems on my first vaping steps making the transition pleasant...
The z80 kit seems an impoved version in every way from the great z50 kit in my opinion...
Removable battery is always good to have....bigger size make it better to hold in the hand...very lightweight but also feels sturdy....great machining always from innokin and buttery smooth threads on the battery cap...
I still don't know if the Fourier vape tech with the new board can improve the coil life or the refresh makes any difference but I always like to see innovation and the mod performs very good that's for sur....the z coils already for me are great coils and very long lasting anyways ..
I also saw the 0.8ohm coil has bigger juice holes now!!!! I don't know since when this happend cause i have a stock of older coils and I also rebuild them...
I always thought the juice holes were kinda small for the 0.8ohm coil and sometimes on colder temps it couldn't keep up to wick 70vg juices in my opinion if u chain vape
I am very happy innokin doesn't settle and still making improvements and fine-tune their coils even tho they are so successful...
The zenith 2 is an improved zlide tank in my opinion maybe they chose to name it zenith caus the old zenith is a legend hahahaha
In fact is so similar u can swap the bottom airflows from the zenith 2 to the zlide if u wanted
its same dimensions as the zlide if u don't count the curves on the airflow ring and topcap,those curves btw make it look soooooo good
....it has wider chimney inner diameter that helps for direct lung vaping and it's not much bigger to affect the mouth to lung flavour in my opinion.....
it also comes with larger juice capacity cause the twist topfill mechanism that borrowed from the zenith takes less space and makes the tank be able to hold more juice than the zlide on same dimentions oh yeahhh....
the new airflow system is perfect....with small holes to be able to fine tune mouth to lung from tight to airy and a big slot to wide open and vape direct lung...
In my opinion is not just restricted cause it can be almost as airy as for example the hellvape destiny rta that is single coil direct lung rta.... The zenity 2 can supply the 0.3ohm z coil with all the air it needs and Vapes great...something that the zlide couldn't keep up...
I have a ijoy zenith I just got it two weeks ago and it is not charging and it is just getting extremely hot when I plug it in what do I do
74 days without a cigarette so I’m still new to this whole vaping thing.
Started with Juul, got tired of refilling pods very quickly.
Switched to a Smok Nord. Have grown tired of the hit/miss with cools.
Just got my Zenith tank. Went ahead and got the Kroma/Zenith kit and it’s my first non-pod setup.
Like it so far. Only issue so far is there seems to be a lot of juice coming through when I take a hit. When I take a drag but put a thin white piece of cloth over the tip there is a very noticeable amount of brown stain on the cloth. Had the same issue when I got my Smok Nord but I corrected by switching from 50/50 nic salts to a 70v/30p freebase.
Currently Using the same 70vg/30pg 6mg Halo Tribeca.
Using the 1.6ohm coil;
Started at 14 watts;
Dropped to 11 watts and it reduced the juice but also the temp of the vape.
Adjusting the airflow doesn’t really make a difference.
Anyone else having the same issue with the amount of juice coming into their mouth? Is this normal with this type of setup? Did I flood the coil or something? I primed it with 5 drops then let it sit for about 10-15 minutes before taking the first hit.
Will probably limit it use at the house because I don’t want to carry around so much weight in my pocket.
Hey. I have a very annoying dry hit problem with my Innokin Zenith tank. I can't figure out what makes it happen. It happened on an used coil, so then i changed coils, but it happened again on the new coil.
I have 30% PG 70% VG liquid, didn't chain vape too much, had it on 14 watts, the tank was full, i had primed the coil...
Help is very appreciated!
So I've been vaping for 2-3 years now. Mainly on a Big Baby Beast and Baby Beast. When the X Baby came out I got one but stayed with the big baby. X Baby motivated me that vaping wasn't gonna get much better than what we already had. Now after 6-9 months out of the loop, I see mesh is in. My local supply doesn't even carry X Baby coils anymore. So since I've been using the same 2 tanks for over 2 years, well it's time. I just want something better than what 2017 had to offer. I have rebuilt coils in the RTA for the Big baby. I can build basic coils. I want easy. I'm too busy to do anything past a simple mesh RTA or a new mesh sub ohm replaceable cool setup.
I like DL Vapes in the 30-50 watt range. With the Smoke stuff I've never went over 50 watts and I'm happy with that or I would need a new mod.
It would be nice to get a recommendations that the typical local supply would carry coils for
Giveaways are back, with a great chance to win from our good friends at Innokin!
As before we're lucky to have the vaping legends @Dimitris and @pbusardo on hand to answer all your questions!
Enter the giveaway simply by posting in this thread and ask Phil & Dimitris a question about the CoolFire Z80, Zenith II, MTL Vaping, or anything else vape related that you have been dying to ask or would be useful for the vaping community here at ECF.
10 winners can choose either one of two options for their prizes;
Option 1
1 pcs Coolfire Z80 kit + 1 pcs Zlide tank
Option 2
1 pcs Coolfire Z50 kit + 1 pcs Zenith II tank
Colours will be chosen at random.
But wait!! There are also 5 Extra ECF Thread Grand Prizes:
1pcs Coolfire Z80 kit + 1 pcs Zenith II tank + 1 pack of Z-Coil + 1pcs Innokin hat
The 5 Grand prize packs will be given to 5 participants who ask the best, most interesting questions below, as chosen personally by Phil and Dimitris.
Winners must be of legal vaping age, only one prize per person, and this giveaway will run from July 9th to 15th.
Good luck & thank you for your support!
Considering getting the Sensis but wondering if the coil +, refresh and f0 modes really do improve coil life. I would probably use the adapter with the zenith tank as well as the pod so especially interested to hear anyone’s experience using it this way and whether you’ve seen the life of your coils noticeably increase. Thanks