Suggest/link Me Wire (tc, Non Tc, Round, Exotic, Mtl, Etc)

I have a dna75 single 18650 that I take out with me.
I just ordered a bunch of small'ish MTL clones to use with it (Spica, Prime, V5, Millie, Gate).

I also have a DNA250C triple 18650 that I use at home.

I never used TC and don't really want to learn it nor power curves but might have to learn that later if I feel the need to. I already prefer and am grateful for escribe customization so maybe TC and curves won't be a PITA to add.

I couldn't get DNA250C's idiot-proof Replay Mode to work the one time I tried it with a dual SS fused clapton (others have had this problem, maybe it was the tank I was using).

For DNA250C bigger builds, I just ordered an Aromamizer V2 Plus RTA. And a Fatality 25mm. Fatality I might also use on the DNA75 with a smaller coil so battery easily lasts a day.


I'm guessing for the smaller MTL tanks to get round 316L if I do TC, and for wattage mode some Kanthal. I'm OK with even buying a DNA75C for Replay mode if the MOD is small sized though.

I really don't like ramp up time even with smaller coils, so maybe I should just learn TC and get 316L wire? For the DNA250C builds, ramp up would be long but I'm hoping Replay Mode will easily solve that.

Not sure which gauges.

And/or maybe for the MTL smaller builds get some thin clapton or something besides round? I don't want to kill the battery fast though but am OK with smaller puffs.


I already have some all-SS 316L Geek Vape Fused Clapton 26ga * 2 + 30ga, so that should be good for the bigger builds and Replay.



Thank you  


Similar Content



Round Wire Vs Fused Clapton

I’m a mouth to lung vapor and currently using the holic rda and galaxies rdta. I’ve tried using ni80 round wire and superfine mtl fused Clapton ni80 wire. The round wire is so easy to work with and the superfine is harder but I’m getting the hang of it. My question is with coils that ohm out the same with each wire I get flat flavor with the round wire and the flavor definitely pops with the fused Clapton wire. Is this normal? Same juice, same wattage, same ohms and same rda and squonk.
I love working with the round wire but not worth it if I can’t get better flavor.  

Do You Save Your Coil Builds?

Hey guys just recently got a Lemo2, wasn't happy with the coil that it came built with for some reason so built my first one to put in. I think it came out pretty good, I believe it came with 24g Kanthal and I did 11 wraps around 3.5mm came out to 0.9ohm. It takes a while to ramp up but seems to give a nicer vape to me than the stock one which was like 5 wraps around 2mm at 0.5 ohm.

Anyways, I tossed the original coil and now am wondering if I really had to or could have saved it. When you guys try new coil builds do you save your older builds? And being that it's really just resistance wire does a coil ever really need to be replaced or is it just for novelty/trying new builds?  

Cleaning Nickel Wire (ni200) Builds?

Hey folks,

Have been getting into vaping on temp control (DNA40) devices with Nickel Wire builds in RDAs. Does anyone have experience with cleaning these builds to extend life? You can't dry-burn Nickel Wire the way you can Kanthal so I haven't figured out a way to clean these builds other than rinsing as well as possible and rewicking.

Hate the idea of having to rebuild every time but if that is what needs to happen I'll do it.  

Coils For Cloud Beast?

Where can I buy just the Clapton coils or wire for my SmokeTech Cloud Beast. I’ve been using the rebuildable coil for 2 years and it’s always been at .3 ohms. Over the last week it has slowly gone up to .52 so I took it apart and saw that the putter wire is degrading.

They are Clapton, correct? Or fused Clapton?  

Why So Little Love For Side By Sides?

Over the last 24 month or so, mods became bigger and bigger due to increasing sizes of batteries and comically large tank attys. Don't get me wrong, I appreciate the fact that I only need to change the battery and fill the tank once per day, that's awesome, however, some of those devices got to a point where they became not very portable anymore... Gone is the time in which the mod can be put in the pockets of your pants.
So, as far as I'm concerned, I got realy tired of those huge mods and went back to one of my first mods, no VV no VW no temperature control.... Its the REO mini..... Super small and tough as nails.
After a while I kept looking for something comparable but a non squonker mod. I found the Ministick with the 18650 extension.
I have it now for a few weeks and I'm sooooo happy with it.
It's just a tad larger than the REO mini but it carries the 18650 battery and the Kayfun V4. This mod would be quite a bit smaller than the REO mini if I take the battery extension off, which is very impressive.
I will very likely never buy another regular tube or box mod just due to its size.
I see only pros for side by sides, they are the perfect combination between small size and good battery/tank capacity, so I'm naturally wondering why they are so little loved?
What is your point of view?  

Mech Mode Problem With Ohms Law

hi all i have created a build dual coil with 27gauge wire 5 wraps, i dont have an ohm reader to read the ressistance , and i want to put it in a single 18650 mech mode. Do you think its ok to do it like that ?  

Stumped On A New Ecig Type

My mother in law just came home with a new Ecig. She is fairly old, yet insists, no matter how how many people tell her, that Cigarette sized ecigs are NOT economical in the long run. Don't even try to make suggestions, she's really stubborn.

Anyways, she's been off of Cigarettes for a while, and has been using an EGO/Stardust combination for almost 2 years. She said her battery wasn't holding a charge, and decided to pickup a new ecig. She bought something called a Mistic brand ecig...but it has a tank on the end of it. The whole unit is about the size of a normal cigalike. However, the end is a mini tank system. I tried it, and little vapor comes out of it.. which she says is fine. I will say, the products looks nice.

It seems it has a very small battery in it with a smaller than a mini protank II style general configuration for the atomizer. I doubt the thing holds a mil, and I doubt the battery is over 100MaH. The unit screws off the battery, and then the coil and wick unscrews out of the tank. It reveals a setup similar to a mini protank, where the chimney goes into the coil. The coil is TINY. I tried peeking down to see if I can see the coils, but I couldn't. I can't find any sort of specs about the product, type of connector (It's smaller than a 510), battery size/capacity, or even where to buy replacement coils. On the box, there is a website... MysticVapors.com is up for sale!!, but even that site is vague on anything about it and only sells the starter kits. Is there any information about the device anyone knows about? Its a cigalike size with a tank. Can replacement coils be bought? any gotcha's (besides incredibly low amount of vapor) A link to the exact item she bought is HERE. I feel she's just wasted money, but if I tell her that, she just gets all huffy.


Thank you in advance.  

Who Has The Ipv4 That Actually Likes It?

Hi all
Couldn't find the topic on VW mods
so I thought I'd post my question here..
I have two IPV4's that have been great running kanthel builds in the power mode,
but I really don't see a difference running the NI200 Atlantis coils in joules mode using the Temperature Control feature of the IPV4..In fact I get a burnt taste in the Atlantis after vaping a tank of juice running the .12 ohm NI200 coil from Vapor Shark..
Now the mod hits great with the kanthel coils in the Starre and Herkakes sub tanks and is great with the .2 ohm kanthel build in the Dark horse at 65w (power mode) but so far TC has been a real disappointment for me

sent from my XT1080 via Tapatalk  

Your Coil Builds

Was wondering about everyone who makes their own coils, what is your favorite builds? Do you stick to single,dual,triple coils? (or higher) would love to see pics if possible Heres mine, a bit blurry
 

Coil Builds

I'm about to venture into doing my own builds and I had a silly question. I have watched dozens of videos on how to do builds and have even done a couple builds on some of my friends attys. I have one friend who on all his dual builds he uses two coils with different wraps. For example one coil with 7 wraps and one with 5. Does anyone else build this way? I have never asked him why he does this and in all the videos I've watched I've never seen anyone else do it. Is there a specific reason? Just curious