Mistakes You Have Made As A Newbie Or A Veteran Of Vaping.

Thought this would a fun thread to get going here in ECF.

Well,i'll start with something that just happened to me.

So yesterday i got my order in from the spanish website i use for my vaping needs,got some DIY materials and a couple of coils for my Innokin Zlide.

The vape shop was kind enough to send me as a gift a bottle of peach flavoured hand sanitizer.

I kept that hand sanitzer on my desk but stupidily enough i kept it close to my bottles with e-liquid.
So i refilled my Innokin Zlide with what i thought was my popcorn flavoured e-liquid when in reality i just refilled it with the peach scented sanitizer.

Lucky for me when i closed it i could tell by the smell that something was wrong so yeah...that happened.
Tossed the coil to the garbage (only used it like 2 days) and proceeded to wash and clean the tank,but in my defense the bottles look the same (except for the colour that is)



Common mistake,lights were turned off and i was watching a movie so yeah that happened hehe

p.s. hand sanitizer is the bottle on the right  


Similar Content



Shortness Of Breath And Lungs Aching After Vaping?

Hi all I've been away from you amazing people for a while because sadly I had to break my streak of non-smokery, of reasons that I don't want to explain to keep this thread shorter, but would gladly if you asked me on the comments.
2 days ago I bought 200ml of 12mg 80/20 n-base in two 100ml bottles, and 30 ml of ready to vape 50/50 12mg juice flavoured with; Kentucky bourbon, coconut, roasted almond, vanilla and brown sugar (tastes like heaven). well, yeah I smoked heavily for nearly one and a half year and just returned to vaping 2 days ago and no desire for cigarettes at all since! (I have a problem though)

I even have this pack that I am not throwing away that I could smoke easily, but you know the trick I am away and I am for good. I wanted that nic rush asap and others just don't cut it, that's why I chose to vaporize 12mg, but will dilute one bottle of the n-base to 8 or 6mgs. The other reason being that vapes and selling any vape products are all banned here, (IT SUCKS!) so I want and need to get everything as cheap as possible(.... is expensive).

I am using a vaporesso revenger X that I chose thanks to you amazing people <3 with the stock NRG tank's GT 4 coil, not coils , Which I had to rebuild myself again. Trust me, there are no hot spots or anything, just like the original is what it turned out to be, so I know that the coil is not the problem. I know that 100% it is not because I vaped 0 mg to get used to it while I was waiting for the shipment and it tasted amazing and I had no negative effects at all. I added 9ml of mixology prime flavouring to one of my 100ml n-bases(caramel, vanilla, dried nuts and a slight touch of tobacco) and while I was waiting for it to steep, I wanted to taste it and yeah it tasted decent as well.

The problem with everything (or me) is that my lungs ache when I wake up, (happened rarely if I smoked too many cigarettes that night) I get too much of a throat hit, but the most concerning for me is that I get shortness of breath almost like my alveoli shrunk and it's like; I breathe, and my lungs fill up with air like 1 second later, I can not get the satisfaction of a deep breath, and the effects last for like 3 to 7 minutes. As I said, I smoked heavily for 1.5 years before that and this is what concerns me. Sorry for the novel-long thread but I'm just kind of in panic you know? Hopefully, you understand me. I am vaping non-flavoured n-base as of now and it is gentler on me but is still the same.

What could this be? Any help and suggestions are appreciated. Thank you so, so much for reading this. Lovey'all  

Dry Hit Problem

Hey. I have a very annoying dry hit problem with my Innokin Zenith tank. I can't figure out what makes it happen. It happened on an used coil, so then i changed coils, but it happened again on the new coil.

I have 30% PG 70% VG liquid, didn't chain vape too much, had it on 14 watts, the tank was full, i had primed the coil...

Help is very appreciated!  

Ended Innokin Coolfire Giveaway - 15 Kits Up For Grabs!

Giveaways are back, with a great chance to win from our good friends at Innokin!

As before we're lucky to have the vaping legends @Dimitris and @pbusardo on hand to answer all your questions!

Enter the giveaway simply by posting in this thread and ask Phil & Dimitris a question about the CoolFire Z80, Zenith II, MTL Vaping, or anything else vape related that you have been dying to ask or would be useful for the vaping community here at ECF.

10 winners can choose either one of two options for their prizes;

Option 1
1 pcs Coolfire Z80 kit + 1 pcs Zlide tank

Option 2
1 pcs Coolfire Z50 kit + 1 pcs Zenith II tank

Colours will be chosen at random.

But wait!! There are also 5 Extra ECF Thread Grand Prizes:

1pcs Coolfire Z80 kit + 1 pcs Zenith II tank + 1 pack of Z-Coil + 1pcs Innokin hat

The 5 Grand prize packs will be given to 5 participants who ask the best, most interesting questions below, as chosen personally by Phil and Dimitris.

Winners must be of legal vaping age, only one prize per person, and this giveaway will run from July 9th to 15th.

Good luck & thank you for your support!

 

My Adept Innokin Zlide Device No Longer Holds A Charge.

I tried to charge it with two different micros USB wires and it no longer charges. So I guess I'll have to buy a new device to pair with the tank. Or maybe I should buy an entirely new set up. I suppose I could order another Adept Zlide, but does anyone know of a different mod device that is smaller than the Adept, fits the Zlide and has a decent battery? The Innokin Adept Slide is a bit too big for me. Any other starter kit recommendations would be great too. I'm not knowledgeable about vaping but I know I like it more than smoking.  

Coolfire Z80 Kit Vs Coolfire Z50 Kit


The coolfire z50 kit is the vape device that helped me quit smoking and start vaping one year and one month ago...it was a good choice cause I had no problems on my first vaping steps making the transition pleasant...

The z80 kit seems an impoved version in every way from the great z50 kit in my opinion...

Removable battery is always good to have....bigger size make it better to hold in the hand...very lightweight but also feels sturdy....great machining always from innokin and buttery smooth threads on the battery cap...

I still don't know if the Fourier vape tech with the new board can improve the coil life or the refresh makes any difference but I always like to see innovation and the mod performs very good that's for sur....the z coils already for me are great coils and very long lasting anyways ..

I also saw the 0.8ohm coil has bigger juice holes now!!!! I don't know since when this happend cause i have a stock of older coils and I also rebuild them...

I always thought the juice holes were kinda small for the 0.8ohm coil and sometimes on colder temps it couldn't keep up to wick 70vg juices in my opinion if u chain vape
I am very happy innokin doesn't settle and still making improvements and fine-tune their coils even tho they are so successful...

The zenith 2 is an improved zlide tank in my opinion maybe they chose to name it zenith caus the old zenith is a legend hahahaha
In fact is so similar u can swap the bottom airflows from the zenith 2 to the zlide if u wanted

its same dimensions as the zlide if u don't count the curves on the airflow ring and topcap,those curves btw make it look soooooo good

....it has wider chimney inner diameter that helps for direct lung vaping and it's not much bigger to affect the mouth to lung flavour in my opinion.....

it also comes with larger juice capacity cause the twist topfill mechanism that borrowed from the zenith takes less space and makes the tank be able to hold more juice than the zlide on same dimentions oh yeahhh....

the new airflow system is perfect....with small holes to be able to fine tune mouth to lung from tight to airy and a big slot to wide open and vape direct lung...

In my opinion is not just restricted cause it can be almost as airy as for example the hellvape destiny rta that is single coil direct lung rta.... The zenity 2 can supply the 0.3ohm z coil with all the air it needs and Vapes great...something that the zlide couldn't keep up...

 

You Guys Set Juice Rules?

Just curious how you guys go about vaping through your juice bottles. I buy 30 ml bottles usually. I have a few tanks and dedicate a specific bottle to each tank. I make myself finish off a bottle before I go onto my next juices. If I decide to put a half bottle away and try a new flavor, I'd have a bunch of half bottles laying around and it would annoy the hell out of me.
I have a couple 60 mils on the way though, so I suppose I wouldn't mind stashing those halfway through. I suppose it could be way different for people that drip though.  

Help Please: Got New E Cig & Had To Replace The Liquid 3 Times In 6 Hours.

I just bought a new E Cig, the Adept Zlide kit - Adept Zlide Kit

My issue though is that within 6 hours I have replaced the liquid 3 times. It just goes down ridiculously quick, and I'm not really chainsmoking it.

Basically, how do I make the liquid last longer before replacing it, avoiding the obvious answer of "Don't vape it as much" haha. I'm not really familiar how airflow holes and wattage works, so perhaps I'm doing something wrong with that part of the E Cig. I've got my airflow fully open at the moment though, could that be why the liquid is going down so fast? Does more airflow cause more liquid to be used?

I'm using a 1.6ohm coil and my wattage is set to 14, which is the second lowest. Does less wattage use less liquid? Not sure if it's one of these or a combination of the two that is making the liquid go down so fast.

Thanks guys.  

Burning, Almost Coppery Taste After Vaping - Not Coil

Hi, sorry if there is a similar thread I am relatively new here,
I have always had issues with burning e liquid over various devices and brands,
I currently have a istick 30w with a kanger subtank, only bought the tank yesterday and battery last week, however it was fine yesterday, was vaping at an average of 17w, however i did go up to 30w depending on stress levels (And i'd gone from 20mg to 6 mg given i was now subbing) - However since today i have noticed a burning, almost coppery, metally (Apologies for my brilliant description) accross the range of vaping, used to get it with my old i stick but only when i was vaping at higher levels, however now it is happening all accross the range, obviously a lot worse and completely metally at higher wattage, any advice? - Swapped out the coil to the 1.2 and it was still doing it, with a fresh refill of liquid, was adding the coil properly and everything. just thought i'd solved this issue. many thanks for any advice, this is a £80+ setup so i want to get anything returned if there is anything wrong with tank etc/

EDIT: When I was in the shop they mentioned it could be the pg/vg of the liquid, however it was doing it at 70/30 and now 50/50, any advice?  

Whoaaaaaaaaaa Some Stuff Changed Around Here!

It's been a while!

I left for a while,,,,,,,I think it's been a year or more,,,,,,I took a break because,,,

1) I thought it was getting too political around here (my opinion) and I wanted a break from it.

2) I got a job (which I LOVE) and it takes a lot of my time,,,,,,,

3) I stopped vaping. Yep, me,,,,,,,,who vaped 20 ml a day at one point,,,,Nope, I didn't go back to smoking,,,,,I didn't plan it,,,,it just,,,,,happened. Mostly due to the job, I think,,,,,,I just vaped less and less and less until I wasn't vaping at all,,,,,,,,

then WHAMMO,,,,,,,,the urge for cigarettes hit,,,,,like 9 months after I stopped vaping and almost 3 years after quitting smoking, and it hit like a ton of bricks. It kind of surprised me to be honest. Well, there was no freaking WAY after THREE YEARS that I was going to start smoking (I did that THREE TIMES in the past and it was ALWAYS a disaster),,,,,,so I picked up my provari, charged those batteries, made myself some No Nic juicy peach, and started vaping again.

Thank GOD for my e-cig, because there is NO DOUBT in my mind I'd be smoking again if I hadn't kept it.

Some thoughts,,,,,,,,

1) whoaaaaaaaaaa what the heck happened to this forum???

2) Provari has a VERSION 3??????????

3) Where the heck do I reset my password????????? I forgot mine, I had to have it reset, and I'd like to change it to something I'll remember.

4) It's nice to see everyone  

Why Do Cotton Based Coils Hate Me?

I can only get about a 1-2 day life span out of coils that are organic cotton based. After 1-2 days, they start seeping a dark colored liquid into my tank and ruining the juice. This has happened in my Atlantis tank running Melo coils vaping at 32 watts and my Herakles tank running 55 watts. Keep in mind I vape about 7-10ml a day. Juices are 70VG/30PG or 80VG/20PG all at 3mg nic.

On the flip side, if I vape old school Atlantis coils at 32 watts on the same juices, I get a full week before this happens.

Any ideas on how to make cotton coils last longer?! For this reason, I can't wait to get my Lemo 2 in. I'll be able to rewick daily and not worry about cost.

The way things are going, I am losing so much money on coils it's nuts. See picture to see whats happening.

Oh yeah, this is happening on all kinds of juices I vape. Mt Baker Vapor, Vista Vapors, 4 Pillars, The Milk Man. Some are budget juices - others are premium. No matter what juice I use, it happens.

The BIGGEST killer is Zeus Juice with 80%PG, 20%VG. This juice kills a coil in one tank full. I'm guessing the sweeteners in that juice do it.

It's frustrating because I LOVE my Herakles tank running at 55W but if I have to replace the coil every 1-2 days, that's SO expensive.