Xtar Vc2s Charger Question

Hey guys,

I finally updated my charger a few days ago (I think before I had the VP2) or something like that. Quick question on something I'm noticing that seems a bit odd to me.

When I charge (for example 18650's), a battery that's fully charged in channel 1...it flashes FULL/0.00 mA, I remove the battery. A few minutes later, I'll put the battery back in the same bay, and all of a sudden there are a few hundred mA's that show up on the screen that need to be charged back into the battery and it takes a few minutes for channel 1 to recognize the battery is fully charged and flash FULL/0.00mA again (although it does show above that's fully charged at 4.2v).

If I take that same battery and do the same test but this time in channel 2, within a few seconds it recognizes that the battery is fully charged and flashes FULL/0.00mA. So it seems channel 1 is not working as well as channel 2 is, when it comes to recognizing information from the battery.

Is this normal for this charger or do I have a defective charger?  


Similar Content



Wismec Luxotic Surface Battery Low Issue

I got a problem with my Luxotic Surface. I'm using a LG Choco Battery 18650, it was fully charged and when I press the fire button suddenly it appears for Battery Low even the battery was on fully charged. I tried my spare battery maybe its just a mistake putting a fully charge battery, but it was the same issue also with the spare battery. I tried the 2 batteries with my Geek Vape Aegis 100W to check whether my batteries are already broke but it works fine. I was vaping for my Luxotic Surface by 55.0 Wattage, 0.21 ohms, 3.40 Voltage. Can someone help me out to fix this problem?  

Some Series 18650 Questions

I bought my Sigelei 100w Plus a few days back and ordered 2 Sony VTC4's on my same order (I'm confident they're legitimate, I've bought some before) to be able to marry them together and use them with my Sigelei. Upon receiving the batteries, I labelled one A, and one B and put them into my charger at the same time (charger was off, put both in and turned it on), one battery is slightly more charged than the other (it's 2/3 bars, while the other is still 1/3). I'm a bit worried about using married batteries, I understand rotating A and B in my Sigelei and charger but will they be the same charge when they're done? They're new batteries and they both went on at the same time yet one of them is charging a little bit faster.

When both of the batteries are fully charged, will they be safe to use and cycle accordingly? I heard about if one battery has even a tiny bit less, the batteries will take an uneven load and it will make it risky. How do I ensure that these batteries remain married?  

E Cig Battery Question?

I have an orbit cannon vape pen. I believe it's 510 style.

I bought it 5 months ago. I just got around to using it. You press the button 5 times, and it turns on, press it 5 more times and it shuts off. The light also indicates the battery voltage. It turns white when fully charged, and then blue, and then red when it's almost dead. There is also a light on the charger that is red while it's charging and then it's supposed to turn green when it's done charging.

Well, the e cig battery light stays white for a short while, and then turns blue. It used to stay white longer. It's like after a short bit of usage, it goes blue. The red light on the charger also never turns green no matter how long it stays plugged in.

The e cig stayed in the box, and the battery was depleted. I picked it up a few days ago and put it on the charger to start using it and noticed this.

Does it sound like the battery is messed up? Last night I charged it 3 hours and the red light on the charger never turned green so I unplugged it. The light on the battery was white. Today I went to use it, and the light was blue - I never used it and the e cig itself was turned off.  

Rincoe Manto Aio Help

Hi there,

My rincoe manto aio battery has started to flash. Have tried two new fully charged batteries and it has 5 bars in the battery on the screen and one of them flashes. Even does it when I turn the mod off. Can anyone help?  

Help With Sigelei 100w

So I just received a 100w seigei box mod and I fully charged my 2 18650 batterys that worked fine in my mech mod. When I put them both in my sigelei the battery percentage only tops out at around 50% charged?!!! Like what they are for sure both fully charged. Anyone know what the problem is?  

What Charger Is Best For My Apollo Valiant Vv & Vw 1300ma?

It's quite expensive and I can charge it with a better charger that will prolong it's usability then I'm all for it. It doesn't matter how long it takes to charge, because I have others I can use while it gets charged. The manual says not to use chargers that didn't come with it but I want to find a way to improve their lifespan anyways because their lifespans are short & they're very expensive.
It is quite expensive and if it can be charged in a way that will prolong it's usability then I'm all for it, it doesn't matter how long it takes to charge because I have others I can use while it is being charged. The manual says not to use chargers that didn't come with it but I want to find a way to improve their lifespan they're very expensive.
Apollo Valiant VV & VW 1300mah Battery is my battery's link. If there are any better batteries that are better I may be interested in upgrading, I strongly prefer the stick kind like this, but if they are super awesome they don't have to be but I don't like the idea of having to build a battery myself.  

Ego-t Battery Not Screwing Into Charger

I ordered two of these batteries from FastTech. The cheap price and high capacity (without having a mod or some awkward huge battery) attracted me to them. Some two weeks later they show up...

I have two Puff King chargers that came with starter kits we bought at a B&M store. We've been using them with Tripl3 eGo batteries, one Puff King battery (and another Puff King battery, which was taken back and exchanged for another eGo-T battery, which broke), and so far no problems screwing any batteries in. These two from FT show up however and neither will screw into one Puff King charger, but they both did into the other (same charger, down to the model number and everything). Now, one battery from FT still screws in, but the other doesn't.

I took the non screwing in battery to a local B&M store and the guy there was able to screw it into one of their chargers. He handed it to me, and I unscrewed it, screwed it back in, unscrewed it again, and then neither of us could screw it in again. Now I have one battery from FT that will screw into one of my chargers, but not the other. The other battery will charge, but it has to just like sit in the charger and hope the connection stays okay for it to charge. I still have no problems screwing any of my other batteries into either charger, just these ones from FT. Also, it's worth mentioning that the FT batteries never seemed to screw in right... it always felt weird and finicky getting it to go in.

What's up with these batteries? They claim to be eGo/510 threaded, just like my other batteries. They look just like my other batteries too, except they won't screw in right...  

Joyetech Ego One Setup

Just as a toy I ordered the Joyetech eGo one 1100mah battery and the clearomizer. The performance of this thing is awesome. Im using the .5 head and the battery is full charged and it is putting out crazy vape. Assembled it is about the size of my ipv v2 by itself. This thing is tiny. I loaded The Gentleman's Reserve and the flavor is great. Finally a nice little poket setup for me.

Fully charged this is putting out 35w

Where I ordered it:
Electronic Cigarette | E Cigarette | myvaporstore  

Vape Battery Not Working

Hi,

I bought a new vape cartridge but it won’t work with the battery I have. The battery is charged and just flashes blue when it’s screwed in and pressed.

Do I need to buy a new battery?
Any info would be awesome. You can see the battery and cartridge in the photos.  

Battery Revival

Herro!

So, I always used to use mech mods from about 6 months to a year and a half into vaping. For the last 6 months I've been on regulated (iStick 30W and 50W).

When I switched to regulated I retired my mech mods and 18650 batteries to the closet. I made sure they were all around 50% charged because I heard from someone on here that was the best condition to leave them.

Well recently I've had this curiosity to try them again, only for at home use, mainly for the novelty of it.

So, my question is, what will I have to do to revive these batteries? Are they safe to just throw back on the charger and use when fully charged? Or are they not safe to use?

Batteries: 4 Sony VTC 4's (all were acquired about a month before I stopped using mechs), 2 XTAR (Sony) VTC 4's (about a year old now) , 2 MXJO 2500mah (20A LG's) (about a year old now).

Let me know! Thank you!

Vape Happy,
Cullin Kin