Vape Battery Not Working

Hey guys,

I finally updated my charger a few days ago (I think before I had the VP2) or something like that. Quick question on something I'm noticing that seems a bit odd to me.

When I charge (for example 18650's), a battery that's fully charged in channel 1...it flashes FULL/0.00 mA, I remove the battery. A few minutes later, I'll put the battery back in the same bay, and all of a sudden there are a few hundred mA's that show up on the screen that need to be charged back into the battery and it takes a few minutes for channel 1 to recognize the battery is fully charged and flash FULL/0.00mA again (although it does show above that's fully charged at 4.2v).

If I take that same battery and do the same test but this time in channel 2, within a few seconds it recognizes that the battery is fully charged and flashes FULL/0.00mA. So it seems channel 1 is not working as well as channel 2 is, when it comes to recognizing information from the battery.

Is this normal for this charger or do I have a defective charger?  

I have an orbit cannon vape pen. I believe it's 510 style.

I bought it 5 months ago. I just got around to using it. You press the button 5 times, and it turns on, press it 5 more times and it shuts off. The light also indicates the battery voltage. It turns white when fully charged, and then blue, and then red when it's almost dead. There is also a light on the charger that is red while it's charging and then it's supposed to turn green when it's done charging.

Well, the e cig battery light stays white for a short while, and then turns blue. It used to stay white longer. It's like after a short bit of usage, it goes blue. The red light on the charger also never turns green no matter how long it stays plugged in.

The e cig stayed in the box, and the battery was depleted. I picked it up a few days ago and put it on the charger to start using it and noticed this.

Does it sound like the battery is messed up? Last night I charged it 3 hours and the red light on the charger never turned green so I unplugged it. The light on the battery was white. Today I went to use it, and the light was blue - I never used it and the e cig itself was turned off.  

I got a problem with my Luxotic Surface. I'm using a LG Choco Battery 18650, it was fully charged and when I press the fire button suddenly it appears for Battery Low even the battery was on fully charged. I tried my spare battery maybe its just a mistake putting a fully charge battery, but it was the same issue also with the spare battery. I tried the 2 batteries with my Geek Vape Aegis 100W to check whether my batteries are already broke but it works fine. I was vaping for my Luxotic Surface by 55.0 Wattage, 0.21 ohms, 3.40 Voltage. Can someone help me out to fix this problem?  

i want to buy a new battery but i'm living in korea.
so i decided don't purchase blu battery because it process is rather complicate ,
even i don't want to suffer it again.
anyway fortunately, i found few 510 mini battery on korea ecig webshop.
here is my question
if i buy a new battery then it could be charged in the pack?(charge seat for blu battery)  

I have said many times all mods break sooner or later. I dropped one and It quit working. I had to use an older mod I had for backup and it was usable but would randomly change the wattage. I bought a UWELL EVDILO a couple of months ago and it didn't work out of the box. I bought another mod the Vandy Vape Gaur-21. I received it yesterday. I like it but, I think the battery lights are not functioning properly. I used it for 24 hours and the battery indicators report the batteries are still at full charge. Doesn't seem possible. I am just sharing this info. Merry Christmas!  

Hi guys. Can I use my INR 18650 Samsung 20A battery with a .5 coil and try out 50 watts? I have a new mod.I have looked through the titles and searched all day but don't exactly know what I need in terms of battery. I don't even know how to use the calculators properly. Can someone direct me to some info which would help me. Thanks  

Hi there,

My rincoe manto aio battery has started to flash. Have tried two new fully charged batteries and it has 5 bars in the battery on the screen and one of them flashes. Even does it when I turn the mod off. Can anyone help?  

SO every video Ive seen of someone causing a battery to vent it took a few minutes of the battery sizzling and popping and heating up, smoking, etc. So why do people talk about a battery venting like its an imminent threat? As if say you built a 0.1 ohm coil and didnt know it, fired it and it would blow up in your face? I've never seen it happen or heard of that. Not saying it cant, I'm just wondering where the idea that a battery can just instantly combust without notice is coming from.  

I ordered two of these batteries from FastTech. The cheap price and high capacity (without having a mod or some awkward huge battery) attracted me to them. Some two weeks later they show up...

I have two Puff King chargers that came with starter kits we bought at a B&M store. We've been using them with Tripl3 eGo batteries, one Puff King battery (and another Puff King battery, which was taken back and exchanged for another eGo-T battery, which broke), and so far no problems screwing any batteries in. These two from FT show up however and neither will screw into one Puff King charger, but they both did into the other (same charger, down to the model number and everything). Now, one battery from FT still screws in, but the other doesn't.

I took the non screwing in battery to a local B&M store and the guy there was able to screw it into one of their chargers. He handed it to me, and I unscrewed it, screwed it back in, unscrewed it again, and then neither of us could screw it in again. Now I have one battery from FT that will screw into one of my chargers, but not the other. The other battery will charge, but it has to just like sit in the charger and hope the connection stays okay for it to charge. I still have no problems screwing any of my other batteries into either charger, just these ones from FT. Also, it's worth mentioning that the FT batteries never seemed to screw in right... it always felt weird and finicky getting it to go in.

What's up with these batteries? They claim to be eGo/510 threaded, just like my other batteries. They look just like my other batteries too, except they won't screw in right...  

Just as a toy I ordered the Joyetech eGo one 1100mah battery and the clearomizer. The performance of this thing is awesome. Im using the .5 head and the battery is full charged and it is putting out crazy vape. Assembled it is about the size of my ipv v2 by itself. This thing is tiny. I loaded The Gentleman's Reserve and the flavor is great. Finally a nice little poket setup for me.

Fully charged this is putting out 35w

Where I ordered it:
Electronic Cigarette | E Cigarette | myvaporstore