Using V8 Baby Coils In Aegis Mini Cerberus Tank?

Hello, so i have been vaping with this new Aegis mini kit with a cerberus tank that i bought a couple of weeks ago. I have used up the 2 standard coils that were in the box, but for some reason in my country i am not able to find specific coils for aegis mini kits online (I live in Belgium). My question is if there are any other (more available) coils that i could use in my cerberus tank? I don't want to pay like $30 just to have them shipped from the UK to Belgium to be honest as they should be aroun $16 for a 5-pack. I noticed i could get "Geekvape Cerberus coils", would these fit my cerberus tank? Maybe a dumb question but you can't be sure enough.

Thank you in advance!  

also which mg nicotine would be reccomended for sub ohming for a person who vapes MTL 10 mg,



Was looking for a vape to use for DL, without making my own coils, found the geekvape aegis mini the tank it comes with has good reviews, not sure about the coils though has anyone tried them?  

Hello, so i am a pretty experienced vaper (did it for a year or so, then quit and came back). Right now i have an aegis mini with a cerberus tank and a

Hi,

I have bought this kit I am waiting for it to be delivered, anyone got any experience of this mod?

Thanks

Christine  

So I've been vaping for 2-3 years now. Mainly on a Big Baby Beast and Baby Beast. When the X Baby came out I got one but stayed with the big baby. X Baby motivated me that vaping wasn't gonna get much better than what we already had. Now after 6-9 months out of the loop, I see mesh is in. My local supply doesn't even carry X Baby coils anymore. So since I've been using the same 2 tanks for over 2 years, well it's time. I just want something better than what 2017 had to offer. I have rebuilt coils in the RTA for the Big baby. I can build basic coils. I want easy. I'm too busy to do anything past a simple mesh RTA or a new mesh sub ohm replaceable cool setup.

I like DL Vapes in the 30-50 watt range. With the Smoke stuff I've never went over 50 watts and I'm happy with that or I would need a new mod.

It would be nice to get a recommendations that the typical local supply would carry coils for  

Hi all

I started vaping again after many years like a month ago. My set up atm is Aegis Solo (came with cerberus tank which leaked madly), currently using Aspire Tigon tank and I have an Innokin Zenith Pro which I haven't try yet.

Is taking me a while to figure out what kind of vaper I am, still not 100% sure tho, I know I prefer DL over MTL but not at high wattages because I believe the vapour becomes to warm for me. I like the Tigon tank but is a little to restricted for my liking, I will like more airflow.

Questions:

1 - Is DL at higher wattage always a warm/hot vapour?
2 - What suggestion for a more loose DL tank with vapour not to warm.
3 - Worst case scenario if the cerberus won't stop leaking (I do like the options of several coil compatibility) would the Zeus top airflow be a good option or others?

Any help will be greatly appreciated.  

Hello, Could someone tell me what is a good wattage setting to use on this mod for a beginner I am just starting out?? I will be using e liquid 18mg freebase non salt for starters myself, I prefer tobacco flavor am not a fan of fruit flavors myself. I am presently a heavy smoker. Thank You  

I have been vaping for 4 years now. I am using the baby beast tank. I have 3 of them.
I have never used anything else because,, well, it works fine for me. My problem is that I am having a hard time finding coils. I used to by clone coils on ebay for dirt cheap. There are no longer any coils on ebay. I cant find any coils online. They are either out of stock; or very expensive. What do people do nowadays? Do people still use the baby beast or has everyone
changed to something cheaper/better? I always use Q2 .4 Ohm coils. I only found 1 place online that has them and they are $20 for 5 of them (including shipping). What would you guys do? I was so happy with the clone coils. They were inconsistent but cheap. Some would last 3 days and some would last 10 days; but for $1.35/each I was happy.
Thank you for any advice you can give.
MrElder  

I’ve been vaping the same 2 mods for over a year and 1/2. They are Geekvape Aegis 100watt with Cerberus tanks. I use a couple of tank fulls per day. Lately I’ve been getting short battery charge life regardless of new coil or not, old batteries or new. I recently changed from .3 to .2 ohm coils, does that make a difference? Do these things wear out? I thought the only thing that ever needed replacing was the coil. I have 6 of the same unit in stock. Is it time to replace and pitch?  

Hello everyone. I am new to the forum but I have read a few more topics before having to create an account and explain my problem in detail. I own a Geekvape Aegis Mini TC 80W (with the Cerberus tank) and I'm using a 50% / 50% e-liquid, with chocolate, coconut and oats from Nebula. I have owned it for about 2 weeks now. I've been using a .3 ohms coil in these weeks, and I've been really good, except for the last 2 days, I've burned the coil slightly and I don't like the taste anymore, so I decided to switch to the other .2 ohms that I've bought a couple of days ago, so I primed the coil by putting 4 drips in each cotton hole + 2 or 3 drips in the center cotton (it's a mesh coil). I forgot to say that I vape mainly from 30-40watts but it's fine even from 25-42W, I'll never go over it because only the noise scares me. Yes, I know, it's weird. Anyway, my problem is that after switching to a .2ohms coil (it's been about 30 minutes) at 30watts the taste is yucky, totally different, I wouldn't say burnt but not good, plus the noise is like it's muffled, yeah , I opened the holes, if I go over 30 watts the noise gets slightly louder but the taste worse. I would just like to know if I have to leave it overnight to let the liquid absorb well or change the coil directly because it is faulty (I have another 5 of .2ohms but no other so I can't go back to .3ohms)
So, is this normal?